Results 1 to 11 of 11
  1. #1
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default HVLP ....... a “Dad please” moment?

    I am helping my third daughter ‘dress’ her wedding which is in a few weeks. The chosen aesthetic is ‘industrial chic’ and so far my contribution has been a new-old industrial trolley on which the cake will be cut...

    856795CB-8090-4060-B227-53C7C4E938AA.jpg

    .... and 4 drinks tables to be made of recycled 200 litre drums and recycled timbers. So far, I have made the 4 recycled timber table tops...

    364F2C42-26D5-4957-861B-27ABAA29A41B.jpg

    .... but now I have to paint the 4 200l drums to a satin black! The drums are in excellent condition and so, other than degreasing/cleaning, I don’t have any prep work but I am completely out of my depth when it comes to the act of painting. I have an Earlex HVLP spray set which I use extensively for water based finishes, both clear and colour, but I have never used it for spirit based finishes and I suspect that I don’t have the correct needle to do so?
    So
    • Can I use a water based paint finish that will last at least one raucous night and what/how do I buy and use?
    • can I fudge my way to use spirit based paint with a standard needle on my HVLP?
    • should I just bite the bullet and buy half a dozen spray cans?

    fletty
    a rock is an obsolete tool ......... until you don’t have a hammer!

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Feb 2009
    Location
    moonbi nsw Aus
    Age
    69
    Posts
    2,065

    Default

    Alan.....I would buy a litre of black spraying enamel and lacquer thinners and go for it. I wouldn't worry about undercoats either. Because the exercise is for a "one-off" I think it would be OK (now all the professional spray painters will shoot me down in flames)

    Where will the reception be? Under those tall Eucs in your back yard?
    Just do it!

    Kind regards Rod

  4. #3
    Join Date
    Feb 2009
    Location
    moonbi nsw Aus
    Age
    69
    Posts
    2,065

    Default

    I also meant to say, I would avoid spray cans. I am not a fan of them generally but on "board work" [ie; your drums] its very difficult to get a non stripy coverage
    Just do it!

    Kind regards Rod

  5. #4
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Quote Originally Posted by chambezio View Post

    Where will the reception be? Under those tall Eucs in your back yard?
    Thanks mate, nah, in accordance with the industrial chic aesthetic, they’ve hired an old warehouse in inner Sydney! I’ve offered them a couple of saw-horses for decoration but apparently they are “too clean and neat”.......?
    a rock is an obsolete tool ......... until you don’t have a hammer!

  6. #5
    Join Date
    Aug 2011
    Location
    bilpin
    Posts
    3,551

    Default

    Spray enamel is the way to go. For a one off no need to prime, as I assume the drums are already painted. Your existing spraygun would be adequate.

  7. #6
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,354

    Default

    Quote Originally Posted by fletty;2132351[*
    can I fudge my way to use spirit based paint with a standard needle on my HVLP?
    You can, but I don't recommend it. Did you get a viscosity cup with the HVLP? If so, you should be able to thin the paint to the right consistency and still have effective coverage.

    I much prefer dedicated guns for different paint types.

    But it should be do-able.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  8. #7
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Thank you everyone for the advice. I went to a local paint specialist this morning, Inspirations Paint at Gregory Hills, and they were brilliant
    • “why do you want to go to spirit based paint”
    • ”why don’t you stick with what you know”
    • ”here, this is what you need.......”


    3216B97B-BCD9-4E78-8469-7FF1105794D3.jpg A9553CC3-0590-401A-8D7B-A85EE886B3C2.jpg 1616EF7A-7D6F-4719-BDDD-0E043C381524.jpg 70A581C7-BA59-4E3A-9919-3067106C5646.jpg

    Job done! Boy, am I in the good books....

    E1165B78-A61E-4FEF-AE90-18BAE6AA1EE5.jpeg 41CEAA73-B8F5-476A-8639-6D046A3ED241.jpg

    Apparently all all I have left to do now for the wedding is to “hang steel reinforcing mesh from the ceiling of the warehouse and drape black silk through it” ...... but that’s not until Thursday week
    a rock is an obsolete tool ......... until you don’t have a hammer!

  9. #8
    Join Date
    Jan 2007
    Location
    Katoomba NSW
    Posts
    4,770

    Default

    Let us know if you need help with the mesh and silk.
    Our interior decorating skills are legendary.
    Those were the droids I was looking for.
    https://autoblastgates.com.au

  10. #9
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Quote Originally Posted by NCArcher View Post
    Let us know if you need help with the mesh and silk.
    Our interior decorating skills are legendary.
    IF my scope of work included dramatic lighting, you’d already be on the team!
    a rock is an obsolete tool ......... until you don’t have a hammer!

  11. #10
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,354

    Default

    He. You should've made the drums into old-style incinerators before you painted 'em.

    Slip a smoke-pot and timer into each... dramatic lighting guaranteed!

    Flashing red 'n blues, burly men with commanding attitudes, dressed in police- and firemen costumes...



    Hmmm... on second thoughts, that's maybe more suitable for the Hen's night...

    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  12. #11
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Quote Originally Posted by Skew ChiDAMN!! View Post
    He. You should've made the drums into old-style incinerators before you painted 'em.

    Slip a smoke-pot and timer into each... dramatic lighting guaranteed!

    Flashing red 'n blues, burly men with commanding attitudes, dressed in police- and firemen costumes...



    Hmmm... on second thoughts, that's maybe more suitable for the Hen's night...

    Skew, it’s as if you’ve already read the run sheet for the wedding? In addition to “smoke pots”, “burly men”, and “police uniforms” ...... just add jugglers, a high wire act, street performers and buskers!
    I’m looking forward to it but...........
    a rock is an obsolete tool ......... until you don’t have a hammer!

Similar Threads

  1. CIG HVLP spray kit still available
    By bsrlee in forum FINISHING
    Replies: 19
    Last Post: 13th March 2024, 10:29 AM
  2. newbie-hvlp or not
    By dave_c in forum FINISHING
    Replies: 2
    Last Post: 21st February 2013, 12:33 PM
  3. Hvlp gun or airbrush
    By eisbaer in forum FINISHING
    Replies: 2
    Last Post: 8th April 2012, 10:19 PM
  4. Setting Up HVLP gun
    By Pete F in forum FINISHING
    Replies: 0
    Last Post: 11th July 2009, 04:06 PM
  5. HVLP spray gun
    By jaspr in forum FINISHING
    Replies: 17
    Last Post: 15th October 2007, 02:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •