Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2008
    Location
    Hunter Valley
    Posts
    1,776

    Default Lathe restoration

    My restoration plan is going to be my old Vic Marc Lathe that I have. Because it recently decided to die and a new capasitor has not fixed the problemso will drop my motor into the shop this week. While it is all pulled apart I thought it would be a great time to take it back to scratch and repaint it and just fix it up in general. Does anyone have any idea where I should start regarding removing the old paint and respraying it back in the proper colour. This is certainly not my area of expertise if I had one that is

    I look forward to any help

    Cheers Ian

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,468

    Default

    I would just remove any loose paint/rust sand back and respray Vicmarc may even have paint available

  4. #3
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    I did a restore of an old lathe and the fastest way that I stripped the paint was using an angle grinder with a disk that looked like a dish washing pad. I purchased this from Bunnings, from their tool section. It took off the paint very quickly along with the rust, and left the metal. The corners I did with a paint stripper and scrapper or just used the scrapper to get under the paint.

  5. #4
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,741

    Default

    Quote Originally Posted by Christos View Post
    I did a restore of an old lathe and the fastest way that I stripped the paint was using an angle grinder with a disk that looked like a dish washing pad. I purchased this from Bunnings, from their tool section. It took off the paint very quickly along with the rust, and left the metal.
    I agree these "Strip it" discs are great for large flatfish parts that will stay still when you apply an angle grinder to them.

    For small parts that need to be held in a vice, to save time continuously repositioning them in the vice I prefer to use a fine wire wheel on a bench grinder as it it able to better get into finer nooks and crannies than a disc. I also use a wire disc on an angle grinder.

    Just be aware that wire wheels can throw fine wires easily so full PPE is needed even on your hands and arms. I use TIG welding gloves as they are more tactile than regular welding gloves and riggers gloves are too short and don't cover your arm

    I used the Pilatus discs on a large bench grinder and they were great
    Great deals from Pilatus Abrasives in Strip-It-Discs- | eBay Stores
    It's only a grinder and was quite pitted from corrosion in places some of which I bogged up but I was not too particular about the finish and ended up going with a handpainted hammertone
    It now has a VFD inside the cabinet and so is a variable speed grinder.
    Grinder10inch.jpg Front.jpg

    The 125mm Pilatus discs cost about half that of the Flexovit from Bunnings, more if you buy in bulk and I found the Pilatus last just as long as the Flexovit.

Similar Threads

  1. Terrific lathe restoration article
    By neksmerj in forum THE HERCUS AREA
    Replies: 6
    Last Post: 18th January 2015, 01:31 PM
  2. Wood Lathe restoration
    By Kiwi75 in forum WOODTURNING - GENERAL
    Replies: 14
    Last Post: 31st December 2014, 09:54 AM
  3. Schaublin 102 lathe restoration
    By nearnexus in forum METALWORK FORUM
    Replies: 65
    Last Post: 13th August 2013, 09:57 AM
  4. Lathe restoration
    By Randir in forum WOODTURNING - GENERAL
    Replies: 37
    Last Post: 27th April 2011, 02:19 PM
  5. Lathe Restoration
    By schwartzy in forum METALWORK FORUM
    Replies: 14
    Last Post: 11th February 2008, 12:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •