Results 1 to 7 of 7
  1. #1
    Join Date
    Nov 2018
    Location
    Newcastle
    Posts
    1,014

    Default Painting or powder coating my jointer

    I have this big honk of metal which must become a jointer again. Bought from a fellow forum member who acid-dipped it and then weathered it for a few years . It's a CTJ-350, and will get a spiral cutter head when it grows up.

    I'm trying to decide how to make it pretty again. I'm not fussed with making it look original - I doubt carbatec will become a classic antique.

    I don't mind getting stuck in with a paint brush, but thought I'd explore some less time-consuming options too as I seem to be doing a thousand things at once. I'm a foreign devil, so no idea what these things cost in Straya.

    Thought of powder coating. Got a quote for $350 from one lot which seems like quite a bit - definitely not worth spending that much on it. Might see if there are any spray painters around newcastle/

    Any ideas? Is that powder coating price to be expected?

    I do have a compressor, and possibly a gun lying about somewhere, but I suspect it's not a great starting/learning project (and that won;t be doing any time-saving either!)

    The cabinet is approx. 1000 long x 550 deep x 650 high; two side panels.

    IMG_9483.jpg . IMG_9485.jpgIMG_9486.jpg





  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,351

    Default

    I find this to be very durable on metal surfaces and you can touch it up if needed
    https://www.bunnings.com.au/white-kn...paint_p1567108

    comes in brush on as well, Dulux makes their version as well which is just as good

  4. #3
    Join Date
    May 2011
    Location
    Murray Bridge SA
    Posts
    3,339

    Default

    That price you got isn't too bad, you're not being ripped off. There is a reasonable amount of work in getting it powder coated, getting it spotlessly clean, wiping down with a cleaner, hanging it on a rack, powdercoating, oven time for the powder to cook/cure, then removing it after it has cooled down from around 200 degrees C.
    I think you'll find getting someone to spray paint it will be around the same sort of $$$$$, could even be more.
    If you didn't want to spend that sort of money, and you aren't fussed about the finish, grab some pressure pak cans and have a go, you'll need to give it a good undercoatfirst.
    HTH
    Kryn
    To grow old is mandatory, growing up is optional.

  5. #4
    Join Date
    May 2011
    Location
    Albury
    Posts
    3,010

    Default

    +1 for White Knight epoxy. It's tough. Although I don't think much of the idea of spraying it over rust, which seems to be what Bunnings is suggesting.

  6. #5
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,351

    Default

    Quote Originally Posted by aldav View Post
    +1 for White Knight epoxy. It's tough. Although I don't think much of the idea of spraying it over rust, which seems to be what Bunnings is suggesting.
    I find this product good to prep the surface

    https://www.bunnings.com.au/chemtech...mover_p1107356

  7. #6
    Join Date
    Sep 2013
    Location
    Cherrybrook,NSW
    Posts
    344

    Default

    Molasses bath with electrolysis will get rid of the rust. Quite a few people use it on cast iron camp ovens.

  8. #7
    Join Date
    Feb 2018
    Location
    Victoria, Australia
    Age
    69
    Posts
    101

    Default

    I agree with Wood Collector, the Molasses bath will get the rust off. Then just spray it with a Rustoleum type product and your good to go! The powder coating will certainly be a lot more durable that painting though.
    If you have a compressor and gun around have a go at spraying it yourself. It isn't all that hard to do and it is quite satisfying.

Similar Threads

  1. Powder coating
    By SAISAY in forum METALWORK FORUM
    Replies: 0
    Last Post: 23rd May 2015, 09:47 PM
  2. Powder Coating. Where to buy powder from?
    By Com_VC in forum METALWORK FORUM
    Replies: 4
    Last Post: 5th January 2015, 10:50 AM
  3. DIY powder coating.
    By neksmerj in forum METALWORK FORUM
    Replies: 25
    Last Post: 5th May 2011, 01:17 PM
  4. Powder Coating MDF
    By Pete F in forum FINISHING
    Replies: 0
    Last Post: 20th June 2010, 10:00 AM
  5. Powder coating DIY?
    By neksmerj in forum METALWORK FORUM
    Replies: 5
    Last Post: 16th March 2009, 11:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •