Thanks Thanks:  1
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2
  1. 11th September 2023, 12:59 PM #1
    Crunchie
    Crunchie is offline SENIOR MEMBER
    Join Date
    Jan 2012
    Location
    Littlehampton, SA
    Posts
    302

    Default L3030 Laser Engraving Machine

    Has anyone out there bought a Vevor L3030 Laser Engraving Machine and actually got it going using their downloaded software?

    It was hard enough assembling the machine using their diagrams, then dis-assembling parts because their sequences were all wrong, but now I've found that the screen on my laptop doesn't look like what is indicated in the instruction manual.

    The other problem I've got is that there was a USB in the package, but it wasn't mentioned in the parts list. There is also no reference to it in the manual. It has a sticker on the outside with "TF Card Reader. Not U-Disk". When I plug it into a USB Port, the laptop "dings" as usual but doesn't recognise that a USB has been plugged in.
    Reply With Quote Reply With Quote
  2. 11th September 2023 12:59 PM # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. 16th September 2023, 08:20 PM #2
    malb's Avatar
    malb
    malb is offline GOLD MEMBER
    Join Date
    Oct 2007
    Location
    Alexandra Vic
    Age
    69
    Posts
    2,810

    Default

    Sorry, can't help with the laser engraver, but the description of the "USB" suggests that it a memory card reader/writer. These basically look like a USB memory and have similar interface electronics built in which would provide most of the info for a computer to recognise the device. The major difference is that instead of having memory chips onboard, they have a slot where you can install whatever sized memory card you have available and wish to use.

    The message affixed says that it is a TF Card Reader, not a USB Disk. TF is an alternate and now more common name for a a Micro SD card, often supplied in a blister pack with an adaptor to a fit a full size SD memory card. Closely examine the device you have looking either for a short narrow slot to accept the micro card, or a detachable cover over a slot to enclose and protect a micro card, as they are fragile and can be easily broken if left protruding from the slot.
    I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Laser Engraving
    By double.d in forum CNC Machines
    Replies: 6
    Last Post: 16th September 2018, 10:00 PM
  2. WEST AUST Redsail CNC Laser Cutting/Engraving Machine
    By rod1949 in forum MISCELLANEOUS
    Replies: 3
    Last Post: 1st September 2018, 03:45 PM
  3. WEST AUST Redsail CNC Laser Cutting/Engraving Machine
    By rod1949 in forum MISCELLANEOUS
    Replies: 0
    Last Post: 16th July 2017, 04:52 PM
  4. Laser engraving
    By BlackbuttWA in forum WOODTURNING - PEN TURNING
    Replies: 1
    Last Post: 19th December 2010, 03:35 PM
  5. Laser Engraving?
    By Nuggett in forum WOODTURNING - PEN TURNING
    Replies: 3
    Last Post: 31st January 2006, 08:44 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules