Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
23rd June 2019, 08:59 PM #1New Member
- Join Date
- May 2019
- Location
- Geelong
- Age
- 62
- Posts
- 3
Scheppach 2500 wood turning chisel jig
Hello all. I feel like a serial poster but after this one, I will taper off I promise. Just a quick shout out to anyone who has a scheppach 2500 chisel sharpener with the wood turning chisel jig who knows how to use it. I had a credit to spend at Sydney tools but no one knows how to use it. I have had several contacts with a lovely lady from scheppach who has done ever so well to explain it to me but there are way too many questions left. ANy help would really be appreciated.
-
23rd June 2019 08:59 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th June 2019, 12:30 PM #2
Hi,
I used it for a while many wears ago. Best explanation really is the pictures on the box. Hard thing to explain in words. That and fiddle about with the rest bar and amount of chisel protruding to get the bevel angle. When setting up to sharpen adjust so bevel sits flat on wheel surface. There are likely youtube clips out there too. I found it did an ok job but the setup takes time and really slowed down my turning so I went back to a regular bench grinder after a while.
Regards
John
PS something spooky going on. I have no idea why the word bevel became a link to an ad.
-
25th June 2019, 05:44 PM #3SENIOR MEMBER
- Join Date
- Feb 2016
- Location
- Perth WA Australia
- Posts
- 829
what orraloon says, watch some of the tormek youtube videos, essentially the same design and functionality minus the micro adjuster.
Just make sure you spend time truing the wheel before useage, these machine a notoriously out of wack from factory. if you want a no fuss sharpening system buy the tormek jigs, they're great for a beginner and a massive time saver when setting up your jigs/support bar.
In a nut shell, fill the tray up with water, raise/lower the bar to match the bevel angle and get sharpening.
Similar Threads
-
Impulse By Scheppach TiGer 2500
By Squirrel in forum SHARPENINGReplies: 7Last Post: 29th February 2012, 08:37 PM -
Scheppach Tiger 2500
By Big Shed in forum SHARPENINGReplies: 43Last Post: 13th September 2010, 02:37 PM -
Scheppach TS 2500 bench saw
By Manuka Jock in forum TABLE SAWS & COMBINATIONSReplies: 4Last Post: 8th September 2010, 08:29 AM -
Chip in New Scheppach TiGer 2500 Wheel
By Earthwhile in forum SHARPENINGReplies: 3Last Post: 22nd September 2009, 10:20 PM