Results 1 to 6 of 6
  1. #1
    Join Date
    Jul 2011
    Location
    In between houses
    Posts
    1,784

    Default Storing Davey fire pump

    So now that the cooler weather has arrived I have put my fire pump away until next year, but because it runs pumping salty water from the river, it has a lot of salt build up in the pump body, I ran it today for 30 minutes just circulating fresh water in a big bucket which I put some soluble cutting oil in and there was heaps of crud in the bottom of the bucket when I had finished. So my question is: given that the pump body is alloy, should I store it empty and open? Or fill it up with something like diesel or vinegar or something to keep the air out? Any advice or knowledge of chemistry appreciated. Stay safe everyone 👍

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2010
    Location
    Wimmera
    Posts
    174

    Default

    Diesel will destroy the seals.
    I run mine until the engine is hot, then do an oil change. Make sure there is water in the pump while you do this Don't run it after the oil change.
    Drain all fuel from the tank and carby
    Remove the top and bottom plugs on the pump. And leave it open for the duration.
    A little trick I use is to drill and hole in the wing of the plugs and then use that to cable tie then on to the pup frame.
    They don't get lost that way.

    Hooroo

    John.

  4. #3
    Join Date
    Jul 2011
    Location
    In between houses
    Posts
    1,784

    Default

    Quote Originally Posted by Wimmera Jack View Post
    Diesel will destroy the seals.
    I run mine until the engine is hot, then do an oil change. Make sure there is water in the pump while you do this Don't run it after the oil change.
    Drain all fuel from the tank and carby
    Remove the top and bottom plugs on the pump. And leave it open for the duration.
    A little trick I use is to drill and hole in the wing of the plugs and then use that to cable tie then on to the pup frame.
    They don't get lost that way.

    Hooroo

    John.
    Yes did the trick with the plugs years ago. Did the fuel that’s a no brainer. I think I fixed four or five of my neighbours pumps this year all had stale fuel and crap in them. Store it empty ok, hope I’ve got all the salt washed out.

  5. #4
    Join Date
    Jun 2013
    Location
    Geelong
    Posts
    423

    Default

    Certainly removing the salt water is a bonus the housing is aluminium but it’s probably not necessary to fill it with anything. Aluminium boats and outboard motors use a zinc sacrificial anode but I have never seen anyone show that much love for a fire pump. Would probably recommend you keep the pump primed with fresh water as after all if you have a fire having it ready to go will save time. The mechanical seal is stainless steel, nitrile and ceramic so keeping it free of debris is important but it won’t matter wet or dry. Diesel would probably attack the nitrile in the seal. I’m no chemist but have sold my fair share of pumps.
    cheers

  6. #5
    Join Date
    Jun 2009
    Location
    Elizabeth Bay / Oberon NSW
    Age
    76
    Posts
    934

    Default

    Just for the record, vinegar will corrode aluminium. I leave mine empty over Winter as the others have suggested. Never had a problem re-starting. Those Honda motors are awesome.

    mick

  7. #6
    Join Date
    Apr 2013
    Location
    Macksville
    Age
    62
    Posts
    390

    Default

    You could run some of this Salt Away Concentrate | BCF through the pump.

Similar Threads

  1. Running in a fire pump
    By mhewitt in forum MY RURAL BLOCK
    Replies: 8
    Last Post: 23rd July 2013, 09:50 PM
  2. Replies: 3
    Last Post: 17th September 2012, 09:25 PM
  3. Fire pump and plumbing
    By Reno RSS Feed in forum PLUMBING
    Replies: 0
    Last Post: 13th February 2009, 07:10 PM
  4. Davey pump Hydrascan reset
    By kayep in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 1
    Last Post: 10th April 2008, 02:51 PM
  5. Davey Spa Motor problems
    By BigBad64 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 4
    Last Post: 6th July 2007, 01:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •