Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 17
  1. #1
    Join Date
    Jul 2013
    Location
    Sydney
    Posts
    3

    Default Timber cut to order

    Hi
    Recently saw a new wood project. Its a chair that folds to a daybed. The cut list has 2 inch x 8inch timber 30inch long. Many others similar. Went to Bunnings but couldn't locate 2inch thick. Before I embarrass myself at a timber yard just want to know is it possible to get such thicknesses. It seems a lot. The chair is for my man cave so a hardwood might be to heavy. I can post a link to the chair if allowed to give a better idea.
    Thanks for any help.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Mar 2018
    Location
    Sydney
    Posts
    1,166

    Default

    45mm is near enough? That's what I'd do - 90x45 instead and build up 2x wide to get the nominal 8" wide. Posting the link to the design is fine as long as it's a freely available one.

  4. #3
    Join Date
    Jul 2013
    Location
    Sydney
    Posts
    3

    Default Thanks

    Ana White | Twin Sleeper Chair - DIY Projects

    Yes free plans. About half way down the page is cut list.
    If i just dowel 2 90mm together to get approx 8 inch (200mm). That does sound a bit easier.


    Quote Originally Posted by poundy View Post
    45mm is near enough? That's what I'd do - 90x45 instead and build up 2x wide to get the nominal 8" wide. Posting the link to the design is fine as long as it's a freely available one.

  5. #4
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    6,127

    Default

    You can get 2" no problem, but it will be rough sawn so you'll be down to 45ish by the time it's dressed. 2x8" seems like overkill though, where I used to work we made sofa frames from 32x145mm hardwood and that was easily strong enough.

  6. #5
    Join Date
    Jul 2015
    Location
    Hunter Valley
    Age
    56
    Posts
    1,342

    Default

    If the plans are US based (and it sounds like they are given imperial measurements), bear in mind what the Americans call 1x2 or 2x4 (inches) isn't actually that measurement.

    See here: Lumber Dimensions

    I have a sawhorse project that asks for 2x4, and when checking, I found 90x45 (mm) untreated pine would work just fine (I would mill down the 45mm to 38mm and the same for the 90mm to 89mm (if needed) as per the linked chart). I needed to make sure I was using the exact size lumber on this because of multiple angles that would be thrown out by using different size timber, so I went hunting

    Your 2x8 material might actually be 38mm x 184mm - you'll need to check your plans fairly carefully to see if this is the case.

    Good idea to go to a timber yard, better material than Bunnings and likely cheaper. There are a heap of places in Sydney that do furniture grade pine - one that I know of but haven't dealt with yet is Barrenjoey Timber, from memory in Mona Vale. They have stuff over the size you need, obviously they don't have the exact size you want, so it'll need to be milled down. If you have your own thicknesser and table saw/band saw, you could handle this yourself. If not, the timber yard may be able to help, or perhaps your local Mens Shed will have the machines needed.

  7. #6
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Quote Originally Posted by Dazza33 View Post
    Ana White | Twin Sleeper Chair - DIY Projects

    Yes free plans. About half way down the page is cut list.
    If i just dowel 2 90mm together to get approx 8 inch (200mm). That does sound a bit easier.
    just some background

    2 x 8 (and 2 x 10 and 2 x 12) are standard size framing timbers in the US and Canada. Every Bunnings equivalent carries them and most will cut down the standard 8, 10, 12 or 16 foot sticks to the lengths you require. Locally (Alberta, CAN) it's sold as SPF -- for Spruce, Pine or Fir -- or what ever they were cutting three weeks ago. So for a US "Home and Gardens" reader the sizes suggested are pretty much bog standard, get anywhere, softwood dimensions. To make you cry, a 5m long stick of 2 x 8 will set you back less than $25 AUD, i.e. it costs less than $5 / m meaning that milling it to smaller dimensions is not cost effective. If you pick over the piles there is some very nice stuff bundled as house framing timber.
    Material less than 2" nominal is, in my experience, generally only available as treated decking or rough sawn fence panels.

    If I were contemplating a similar chair using what is readily available in Australia, I doubt that I'd go much thicker than about 25 mm nominal. And I would seriously look at cutting up one or two of Bunnings 19 mm pre-sanded pine panels to get the widths required.
    That chair is built with 2" framing timber because it's the cheapest stuff available in the US, it doesn't need 2" material for strength.
    regards from Alberta, Canada

    ian

  8. #7
    Join Date
    May 2007
    Location
    Gold Coast
    Age
    70
    Posts
    2,730

    Default

    That project looks like something you might make out of sleepers from the garden section. 200x50 treated pine runs at about $8/m at the green shed.
    Franklin

  9. #8
    Join Date
    Mar 2018
    Location
    Sydney
    Posts
    1,166

    Default

    I agree with Ian, I'd use finished pine in 19mm or if you wanted something more "bulky" looking, 35mm. eg https://www.bunnings.com.au/184-x-19...-pine_p8401471

  10. #9
    Join Date
    Apr 2006
    Location
    Hobart
    Posts
    5,107

    Default

    Quote Originally Posted by elanjacobs View Post
    You can get 2" no problem, but it will be rough sawn so you'll be down to 45ish by the time it's dressed. 2x8" seems like overkill though, where I used to work we made sofa frames from 32x145mm hardwood and that was easily strong enough.
    Hi Elan

    I thought that the thickness of the wood was an essential part of the aesthetic of this design. Thin the timber, and its visual appeal changes.

    When I lived in Boston the most popular timbers (read cheapest) were Eastern White Pine (Pinus strobus - density = 0.400 and Western White Pine (Pinus monticola - density = 0.43) and I presume that these are the intended species for the chair/bed. Both of these are considerably lighter than radiata pine (Pinus radiata - density = 0.51). Changing the wood from EWP to radiata, leaving all dimensions unchanged, would increase the weight by 27.5%; changing to an Oz hard wood could double the weight.

    As one would almost certainly have to move the chair when converting it from chair to bed this increased weight would be undesirable; it would make it harder to do, key impact on the chair/bed's functionality.

    Thus I would suggest that it is very important to this design to use very light weight timbers. The only one's that I can think of that are reasonably available and affordable are:
    • western red cedar - Thuja plicata - density = 0.37
    • paulonia - Paulownia tomentosa - density = 0.28


    I saw WRC at a local suppliers last week in sizes up to 200 x 45 mm.



    Cheers

    Graeme

  11. #10
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Quote Originally Posted by GraemeCook View Post
    I thought that the thickness of the wood was an essential part of the aesthetic of this design. Thin the timber, and its visual appeal changes.

    When I lived in Boston the most popular timbers (read cheapest) were Eastern White Pine (Pinus strobus - density = 0.400 and Western White Pine (Pinus monticola - density = 0.43) and I presume that these are the intended species for the chair/bed. Both of these are considerably lighter than radiata pine (Pinus radiata - density = 0.51). Changing the wood from EWP to radiata, leaving all dimensions unchanged, would increase the weight by 27.5%; changing to an Oz hard wood could double the weight.

    Thus I would suggest that it is very important to this design to use very light weight timbers. The only one's that I can think of that are reasonably available and affordable are:
    • western red cedar - Thuja plicata - density = 0.37
    • paulonia - Paulownia tomentosa - density = 0.28


    I saw WRC at a local suppliers last week in sizes up to 200 x 45 mm.
    I don't think so.
    According to "Anna" "We spent about $100 [USD] on this chair"

    The only way that statement is even remotely true, even if you allow an additional 50% for "optimism bias", is if the chair is built from bog standard 2 x 8 construction softwood lumber (which is 38 x 184 mm in real measures).
    In Oz, that means Pinus Radiata
    regards from Alberta, Canada

    ian

  12. #11
    Join Date
    Apr 2006
    Location
    Hobart
    Posts
    5,107

    Default

    Quote Originally Posted by ian View Post
    I don't think so.
    According to "Anna" "We spent about $100 [USD] on this chair"

    The only way that statement is even remotely true, even if you allow an additional 50% for "optimism bias", is if the chair is built from bog standard 2 x 8 construction softwood lumber (which is 38 x 184 mm in real measures).
    In Oz, that means Pinus Radiata
    Hi Ian

    The Point is that radiata is significantly denser than the American equivalents.


    Cheers

    Graeme

  13. #12
    Join Date
    Jul 2015
    Location
    Hunter Valley
    Age
    56
    Posts
    1,342

    Default

    Back-of-napkin mathematics, based on stated (as opposed to actual) lumber dimensions from the cut list *without* the plywood places the material in the region of 18.6% of a cube.

    Using Radiata Pine (around 590Kg/cube) would be 109.7Kg timber
    Using Western Red Cedar (around 350Kg/cube) would be 65.1Kg

    Just IMHO, a 110Kg piece of furniture wouldn't be trivial to move around a room.

  14. #13
    Join Date
    Apr 2006
    Location
    Hobart
    Posts
    5,107

    Default

    Quote Originally Posted by Midnight Man View Post
    Back-of-napkin mathematics, based on stated (as opposed to actual) lumber dimensions from the cut list *without* the plywood places the material in the region of 18.6% of a cube.................

    Thanks Midnight

    And if he built it strong and used ironbark then it would weigh 205.7 kgs !
    https://www.woodsolutions.com.au/woo.../ironbark-grey


    Cheers

    Graeme

  15. #14
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,099

    Default

    Dazza

    I think Radiata Pine will be your only economical option. Radiata varies quite a bit in it's density according to tree maturity. Bootle's "Wood in Australia" gives a range from 450Kg/m3 to 580Kg/m3. WRC would be wondeful at 350Kg/m3 but very expensive I think although it will have the added benefit of no insects wanting to eat it. WRC is extremely soft and damages easily just from casual knocks. Much will depend on your budget.

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  16. #15
    Join Date
    Jul 2015
    Location
    Hunter Valley
    Age
    56
    Posts
    1,342

    Default

    Quote Originally Posted by GraemeCook View Post
    Thanks Midnight

    And if he built it strong and used ironbark then it would weigh 205.7 kgs !
    https://www.woodsolutions.com.au/woo.../ironbark-grey


    Cheers

    Graeme
    I seem to remember a guy wanting to do just that with a similar design to this, but for an outdoor couch.

    Whether he was going to use Ironbark, or just "hardwood" escapes me now, but I do remember a number of people cautioning him on the weight aspect.

Page 1 of 2 12 LastLast

Similar Threads

  1. Did someone order some timber?
    By elanjacobs in forum WOODWORK - GENERAL
    Replies: 16
    Last Post: 18th December 2015, 06:31 PM
  2. Timber by Mail Order
    By Normanj in forum TIMBER
    Replies: 8
    Last Post: 24th June 2009, 01:21 PM
  3. Mail order timber to Longreach
    By Jack E in forum BOX MAKING
    Replies: 5
    Last Post: 18th April 2009, 06:21 PM
  4. Mail Order TImber
    By Ynot in forum TIMBER
    Replies: 2
    Last Post: 26th January 2003, 07:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •