Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2020
    Location
    Sunshine Coast
    Posts
    271

    Default Are you affected by the rain and have a leaky roof

    When you get the rains we've been getting and you have a tile roof the odds are it isn't watertight, especially in high winds, and you'll find wet spots forming on your ceiling. And if you have attic insulation that's an even worse concern. To catch those drips, place particle board across the ceiling joist(s) in the attic. Probably want to pre-cut to 700mm by whatever will get through the access hole. Not MDF, plywood or melamine board but raw particle board. It readily absorbs water and if not disturbed (or stepped on) will maintain its shape for years, and it can hold a lot of water. When the rain stops and the sun comes out and the attic temp skyrockets, it dries out ready for the next deluge. Every few months check it for soundness and replace as needed.

    When dry then you can check for fixable issues.

    I don't think this subforum gets read by most but I don't know where else to put it, and don't want to spam the rest of the site

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    62
    Posts
    13,155

    Default

    How timely.

    We're in a rental with a very low pitched corro roof. The ridge-cap is too narrow and every time it rains we get 'splash-back' up and over where the corro has been bent up under the cap.

    It has taken me two years of chasing damp spots on ceilings to finally narrow down these 'leaks.' The owner's handy-man is still scratching his head about it.

    Considering particle board costs... about $50 for a 2.4x1.2 sheet, I reckon I could line under a fair length of the ridge-line cheaply enough to warrant putting it to the test. If it works, I'll sacrifice some mouldy insulation at the altar of your choice.

    (Of course, the real answer is fitting the correctly sized r/cap but I don't see the owner going there.)
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  4. #3
    Join Date
    Nov 2007
    Location
    Mt Crosby, Brisbane
    Posts
    2,546

    Default

    kitchen makers often have seconds and cover sheets for free or nominal prices. It's often melamine faced or mdf but I've seen a fair bit of chipboard also. Worth a look gumtree fb marketplace etc...

    I despise tile roofs, always have. Long before I owned a house.
    I'm just a startled bunny in the headlights of life. L.J. Young.
    We live in a free country. We have freedom of choice. You can choose to agree with me, or you can choose to be wrong.
    Wait! No one told you your government was a sitcom?

Similar Threads

  1. How to Fix Leaky Shed
    By 62woollybugger in forum THE SHED
    Replies: 17
    Last Post: 30th March 2021, 06:47 PM
  2. Leaky roof - tiled roof
    By Reno RSS Feed in forum STRUCTURAL RENOVATION, ROOFING, DEMOLITION, etc
    Replies: 0
    Last Post: 15th February 2012, 06:10 AM
  3. Leaky roof "Coolclad" Corrosion
    By Bluemanna in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 1
    Last Post: 27th October 2010, 09:26 PM
  4. Leaky verandah
    By Carry Pine in forum STRUCTURAL RENOVATION, ROOFING, DEMOLITION, etc
    Replies: 8
    Last Post: 22nd February 2007, 09:58 PM
  5. Leaky Problem
    By Wood Butcher in forum WOODIES JOKES
    Replies: 0
    Last Post: 2nd January 2006, 09:36 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •