THIS IS YOUR FIRST VISIT - PLEASE NOTE:
REGISTER before you can post, view all the pictures, see all threads
Registering will also stop those annoying popup link ads from
All correspondence between Buyers and Sellers is to be done in the
thread, NOT by PM.
PMs' and Emails are ONLY to be
used for exchanging personal contact information and
only when the deal has been done between buyer and seller.
If you want to buy the item enter "I'll take
it" if you need more info ask for more info in the
thread not via PM.
Hi All would like to find out if anybody can help me to locate the router, drilling and polishing attachments for my radial arm saw. I live in South Africa. Please feel free to email me to [email protected].
I bought one of these saws a couple of weeks ago. It came with the router attachment. I have been pulling the saw apart to clean out all the mud wasp nests and saw dust. This saw seems to have the rod that works the break too short. Maybe it was repaired and the wrong rod put back in. The 20,000 rpm spindle is 15/32 x 20. The 3,450 rpm is 1/2 x 20. You should be able to get them made if you can't find any in an old router or drill.
I am learning, slowley.
Copyright © U-Beaut Enterprises 1999 - 2016. All rights reserved.
This website and its content is copyright of U-Beaut Enterprises. Any redistribution or reproduction of part or all of the contents in any form is prohibited other than the following: ♦ you may print or download to a local hard disk extracts for your personal and non-commercial use only ♦ you may copy the content to individual third parties for their personal use, but only if you acknowledge Woodwork Forums as the source of the material.
You may not, except with our express written permission, distribute or commercially exploit the content. Nor may you transmit it or store it in any other website or other form of electronic retrieval system.