Page 4 of 10 FirstFirst 123456789 ... LastLast
Results 46 to 60 of 144
  1. #46
    Join Date
    May 2019
    Location
    Brisbane
    Posts
    807

    Default

    Great start I would say and good use of whatever means you have in your workshop.

    Looking forward to progress.

    Sent from my SM-G950F using Tapatalk

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #47
    Join Date
    Oct 2010
    Location
    NSW
    Posts
    643

    Default

    It's very quiet in here. Is that because everyone is busy peening, filing, sanding and polishing, or are you all just slacking off.
    I've made a bit of progress and I'm quite happy with the results so far.
    I ground the side bevels on the blade and cut the slot for the adjuster.
    PA190013.jpg PA220020.jpg
    Drilled and tapped the rear sole for the blade adjuster.
    PA190016.jpg
    Got the cap iron complete except for the timber trim.
    PA210017.jpgPA220021.jpgPA220028.jpg
    I turned the blade adjuster from some brass and used a milling cutter in my drill press to put the grooves in by indexing with a square collet block for the first four and rotating 45° for the others.
    Back in the lathe I finished the turning and drilled and threaded it.
    PA230032.jpgPA230035.jpgPA230037.jpgPA230038.jpgPA230039.jpg
    I'm now wondering if I should make the cap screw to match the adjuster rather than just the plane knurling that I put on it.
    So that's it from me for now.

  4. #48
    Join Date
    Aug 2006
    Location
    Canberra - West Belco
    Age
    63
    Posts
    646

    Default

    I'll claim slacking off..... though really i'm waiting to get some hands on steel to make the blade....

    That adjuster knob look awesome !!!!

    Cheers
    Phil

  5. #49
    Join Date
    Mar 2004
    Location
    Brisbane (western suburbs)
    Age
    77
    Posts
    12,093

    Default

    Nice knob, I like it! No fingers slipping on that. But of course the lever cap knob will have to match - only top quality work allowed on these pages!

    I'd like to be able to do a bit of milling like that on my DP, but it's of very mediocre quality & the quill deflects & chatters with all but the lightest of light cuts. I suspect I've done it no favours by using it with an arbor & slitting saw to slit about a hundred saw backs.....

    Cheers,
    IW

  6. #50
    Join Date
    Oct 2010
    Location
    NSW
    Posts
    643

    Default

    Quote Originally Posted by IanW View Post
    But of course the lever cap knob will have to match
    Oh B*^^#!, I was hoping someone would say that it was better if the two were different, and that would have been enough for me to leave it as it is. Oh well my brass order hasn't arrived yet so I suppose I should make the effort while I have nothing else to do except finish other stalled projects.

  7. #51
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,973

    Default

    Quote Originally Posted by Picko View Post
    It's very quiet in here. Is that because everyone is busy peening, filing, sanding and polishing, or are you all just slacking off.
    I've made a bit of progress and I'm quite happy with the results so far.
    I ground the side bevels on the blade and cut the slot for the adjuster.
    PA190013.jpg PA220020.jpg
    Drilled and tapped the rear sole for the blade adjuster.
    PA190016.jpg
    Got the cap iron complete except for the timber trim.
    PA210017.jpgPA220021.jpgPA220028.jpg
    I turned the blade adjuster from some brass and used a milling cutter in my drill press to put the grooves in by indexing with a square collet block for the first four and rotating 45° for the others.
    Back in the lathe I finished the turning and drilled and threaded it.
    PA230032.jpgPA230035.jpgPA230037.jpgPA230038.jpgPA230039.jpg
    I'm now wondering if I should make the cap screw to match the adjuster rather than just the plane knurling that I put on it.
    So that's it from me for now.
    I think you should just go with the plain knurling, that way any of us mia mortals,can use Knurling and feel good about ourselves.

    People I think the goal posts have just moved again [emoji3064].

    Cheers Matt.

  8. #52
    Join Date
    Mar 2004
    Location
    Brisbane (western suburbs)
    Age
    77
    Posts
    12,093

    Default

    Quote Originally Posted by Picko View Post
    Oh B*^^#!, I was hoping someone would say that it was better if the two were different, and that would have been enough for me to leave it as it is. Oh well my brass order hasn't arrived yet so I suppose I should make the effort while I have nothing else to do except finish other stalled projects.
    Just winding you up, as you well know...

    It's your plane, you should be the one to decide what you like better, don't listen to the riff-raff - be creative!

    Cheers,
    IW

  9. #53
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,094

    Default

    Picko

    The plane is coming up rather well. I think your cap screw should absolutely match your blade adjuster. No question about it.

    Regards
    Paul

    (Ahem.. That is primarily to slow you down a bit.)

    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  10. #54
    Join Date
    Oct 2010
    Location
    NSW
    Posts
    643

    Default

    Yeah well now I'm confused. Anyway it's all too late, 'cause I've just spent an inordinate amount of time building a contraption that I can hopefully use to help me index and cut 12 flutes around said cap screw and I agree with some, it should match the other. Oh, it took quite a lot of amber brain lubricant also.

  11. #55
    Join Date
    Mar 2004
    Location
    Brisbane (western suburbs)
    Age
    77
    Posts
    12,093

    Default

    Here y'go PIcko - a bit of hypocrisy from me.

    I've become tired of diamond knurls on everything, too, & a couple of weeks ago I ordered a pair of straight wheels, which arrived today, so I had to give them a run immediately. I decided to make a new knob for my newish chariot plane that has been finding much favour in my shed of late.

    The wheels are pretty coarse at 14tpi & they rattled & bumped their way round the hard (C380) brass I used, but got there eventually. The brass kept wanting to escape from the chuck when I engaged the screw feed, so I had to stop after every few runs & tighten it up again. I think the best approach on my little toy lathe will be to divide the brass into short sections so I'm only cutting very narrow widths at a time. It would probably do better on my mate's solid old Hercus, too.

    Anyway, here's my plane wearing its new lever cap screw, but with the original diamond-knurled adjuster knob I made for it. New knob.jpg

    I like this new thumbscrew better than the first one I made: First knobs.jpg

    But I don't think the coarse pitch would look right on a smaller diameter adjuster screw, so it'll have to remain a diamond pattern unless I decide to get a couple of finer wheels to do smaller diameters. Doesn't look too naff..

    So I wouldn't rush to make a different adjuster knob for your plane before you have a good squizz at the finished article to see if it jars with you......

    Cheers,
    IW

  12. #56
    Join Date
    Oct 2010
    Location
    NSW
    Posts
    643

    Default

    Quote Originally Posted by Picko View Post
    I've just spent an inordinate amount of time building a contraption....
    which was a total failure.
    Check back later for the sad/embarrassing photos when I remember to bring the camera in from the shed.

  13. #57
    Join Date
    Oct 2010
    Location
    NSW
    Posts
    643

    Default

    So, as promised, failure pics.
    P1010005.jpgP1010006.jpg
    The problem was that I had made some of the key components of my contraption from wood because I didn't have anything else of the size required. It just wasn't rigid enough and allowed the rotational forces to take over.
    Anyway, I'm not going to let it beat me. Plan B is taking shape.

  14. #58
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,973

    Default

    Quote Originally Posted by Picko View Post
    So, as promised, failure pics.
    P1010005.jpgP1010006.jpg
    The problem was that I had made some of the key components of my contraption from wood because I didn't have anything else of the size required. It just wasn't rigid enough and allowed the rotational forces to take over.
    Anyway, I'm not going to let it beat me. Plan B is taking shape.
    Don’t think that would easily file out either Picko?

    But hood too see your not beaten yet[emoji106].

    Cheers Matt.

  15. #59
    Join Date
    Oct 2010
    Location
    NSW
    Posts
    643

    Default

    Quote Originally Posted by Simplicity View Post
    Don’t think that would easily file out either Picko?

    But hood too see your not beaten yet[emoji106].

    Cheers Matt.
    Didn't think of a file! I've got a big Bastard too.

  16. #60
    Join Date
    Mar 2004
    Location
    Brisbane (western suburbs)
    Age
    77
    Posts
    12,093

    Default

    You got very close to some tolerable knurling there, Picko. Can you show us/explain how you dunnit? Maybe the collective genius can help with a fix to "the contraption" that'll do the job for you. I'm always on the lookout for alternative ways to make thumbscrew heads.....

    Cheers,
    IW

Page 4 of 10 FirstFirst 123456789 ... LastLast

Similar Threads

  1. Challenge 2020-2021 Sheets
    By Sheets in forum PLANE CHALLENGE 2020-21
    Replies: 71
    Last Post: 14th December 2020, 09:22 AM
  2. challenge 2020 - 2021. banjopicks
    By banjopicks in forum PLANE CHALLENGE 2020-21
    Replies: 48
    Last Post: 22nd October 2020, 11:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •