2 Attachment(s)
The model plane plane has landed
Well look what landed on the workbench.
Attachment 481190
This is a print done at a 45% of full size as that is about as large as i could fit on the small 3D printer
Below you can see the dovetails that will get hardwood infill to create hard wearing touch points for the sole.
I had some fun creating the one below as at 45% sizing that is 6mm tapering to 5mm wide and 3.5mm high. i chopped a 6mm wide section of a little bit hardwood floorboard, then decked it in the mill to about 5 high, hand sanded the bevels :) inserted into the slot then decked it to height back in the mill
Attachment 481189
It's tempting to make a thicker version at the width and actually make a blade to fit as it would seem to be a great little size to do bevels.... i'd even leave the wings on as they provide some nice hand hold locations.