Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 4 of 12 FirstFirst 123456789 ... LastLast
Results 46 to 60 of 173
  1. #46
    Join Date
    Oct 2008
    Location
    Victoria
    Age
    71
    Posts
    631

    Default

    To flatten the 1200 grit water stone I use the coarse carborundum one, rubbing the two surfaces together, rinsing often. The carborundum is only cheap and I've never flattened one! I guess it depends how hard the stone is, because you want a harder, coarser one to flatten it.

    Failing all that, wet and dry on MDF or glass makes a good dressing surface, whether wet with oil or water. (good for the bottom of un-flat planes and plane irons too).

    As to gouges Mike, that's a whole other can of worms for me especially since all mine have different curvatures, and some have the bevel inside etc.. and I don't use a honing guide of any sort, but bring the stone to the tool rather than the tool to the stone....and I don't always get what I want when I want it either! I tend to use small slip stones and I have a small diamond board (the size of a credit card) ...But I wouldn't profess a system good enough to be able to share it. For me, with gouges, it's all in the wrist!...and it's little, often, endlessly.
    What caused the Pacific War? A book to read: here

    http://middlething.blogspot.com/

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #47
    Join Date
    Jan 2009
    Location
    Blaxland, Australia
    Age
    65
    Posts
    2,551

    Default

    Hi Rob,

    Quick query re the honing guide on waterstones: does the wheel score the stones appreciably? I was sufficiently concerned about that to banish the guide to a very safe distance from the WSs!

    Cheers,
    Alex.

  4. #48
    Join Date
    Oct 2008
    Location
    Victoria
    Age
    71
    Posts
    631

    Default

    The roller will only be a problem if it is pressed too hard, especially if you use the same forward and back motion, without varying its path. So it's no biggy, Alex, as long as you relax with the tool and let a nice fluid motion across the slurry do the cutting, not your downwards pressure.
    And the stones are thick and easy to flatten if necessary, so when you start out it's probably better to risk a mistake by relaxing and being fluid, than worrying about the stone and being tense. Get the tools out of the box and make a few mistakes. You were going to do that eventually anyway; nice to have them under your belt. What's the worst that can happen?


    Stones are sacrificial objects, cast onto the altar of our creativity, giving their lives in the creation of wooden objects Every time you sharpen a tool, a stone somewhere suffers for your craft . Craftspeople have to live with the shocking reality of carnage, abrasion and erosion Support the Waterstone Liberation Front (WLF) (Not the United Front for the Liberation of Waterstones [UFLW]- they are splitters)
    What caused the Pacific War? A book to read: here

    http://middlething.blogspot.com/

  5. #49
    Join Date
    Jan 2009
    Location
    Blaxland, Australia
    Age
    65
    Posts
    2,551

    Default

    Hi Rob,

    You've hit the nail right on the head! As soon as I get near a sharpening stone/knife combination, I start to panic and tense up. What's the worst that can happen? Simple! Like my reed-scraping knives, the blades will be ruined! I'll put up a photo of the worst of my knives when I've dug 'em out.

    Got to beware of splitters: bunch o' heretics, the lot of 'em .

    Still, I have read and absorbed what you've advised, i.e., try and relax into it, so that is what I'll do. Or try to do!

    Cheers,
    Alex.

  6. #50
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    67
    Posts
    4,377

    Default

    Quote Originally Posted by rob540 View Post
    Stones are sacrificial objects, cast onto the altar of our creativity, giving their lives in the creation of wooden objects Every time you sharpen a tool, a stone somewhere suffers for your craft . Craftspeople have to live with the shocking reality of carnage, abrasion and erosion Support the Waterstone Liberation Front (WLF) (Not the United Front for the Liberation of Waterstones [UFLW]- they are splitters)
    Can I have a glass of whatever it is you're drinking?

    Richard

  7. #51
    Join Date
    Jan 2009
    Location
    Blaxland, Australia
    Age
    65
    Posts
    2,551

    Default

    Quote Originally Posted by Daddles View Post
    Can I have a glass of whatever it is you're drinking?

    Richard
    My computer keyboard had some of it this arvo, and immediately fluttered heavenwards. Oops...

  8. #52
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    67
    Posts
    4,377

    Default

    Just remember Alex, it's not an official hijack until we get an entire page of posts without him referring to the actual object of the thread

    Richard

  9. #53
    Join Date
    Oct 2008
    Location
    Victoria
    Age
    71
    Posts
    631

    Default

    He's trying to confuse me Alex. He understands how little it takes to make me descend into utter silliness. (I've always thought Being Silly could be a worthy life-times work, but I get distracted from it. Not many people, after all, are still Goonshow fans
    What caused the Pacific War? A book to read: here

    http://middlething.blogspot.com/

  10. #54
    Join Date
    Feb 2006
    Location
    Lindfield N.S.W.
    Age
    62
    Posts
    5,643

    Default

    What what what what what





    5 watts - he's not very bright


    You're not alone, Rob, we just tend to keep it under our hats (we're teh silly ones who still wear hats)
    Cheers

    Jeremy
    If it were done when 'tis done, then 'twere well it were done quickly

  11. #55
    Join Date
    Jun 2007
    Location
    Aberfoyle Park SA
    Age
    63
    Posts
    1,787

    Default

    Quote Originally Posted by Daddles View Post
    Just remember Alex, it's not an official hijack until we get an entire page of posts without him referring to the actual object of the thread

    Richard
    Only need a couple more posts to achieve this, I reckon.

  12. #56
    Join Date
    Oct 2008
    Location
    Victoria
    Age
    71
    Posts
    631

    Default

    Quote Originally Posted by jmk89 View Post
    What what what what what
    i...i...iz that you Neddy?..? They have me tied up in a thread...



    I'll see you one silly and raise you some rudder box mock up.
    What caused the Pacific War? A book to read: here

    http://middlething.blogspot.com/

  13. #57
    Join Date
    Oct 2008
    Location
    Victoria
    Age
    71
    Posts
    631

    Default

    What caused the Pacific War? A book to read: here

    http://middlething.blogspot.com/

  14. #58
    Join Date
    Oct 2008
    Location
    Victoria
    Age
    71
    Posts
    631

    Default Dry fitting the keelson and seat base stringers



    What caused the Pacific War? A book to read: here

    http://middlething.blogspot.com/

  15. #59
    Join Date
    Jan 2009
    Location
    Blaxland, Australia
    Age
    65
    Posts
    2,551

    Default

    Quote Originally Posted by rob540 View Post
    He's trying to confuse me Alex. He understands how little it takes to make me descend into utter silliness. (I've always thought Being Silly could be a worthy life-times work, but I get distracted from it. Not many people, after all, are still Goonshow fans :C
    Heh :). Another one here, although it's years since I listened to one. We've got a compendium of Spike Milligan's work around, including the Q8 Dalek script ;). Actually, that quip of yours seemed to be more "Life of Brian" than Goon, but Monty Python wouldn't have been Monty Python without the Goons' trailblazing (and that of Lewis Carroll, Edward Lear, Hillaire Belloc, and diverse Surrealists, etc., etc., etc., of course... ;). Must go back and look at the lovely boat snaps, I'm getting distracted myself, a naughty alex so it is.

  16. #60
    Join Date
    Jan 2009
    Location
    Blaxland, Australia
    Age
    65
    Posts
    2,551

    Default

    Quote Originally Posted by Daddles View Post
    Just remember Alex, it's not an official hijack until we get an entire page of posts without him referring to the actual object of the thread

    Richard
    I've done my bit to muddy the waters, but maybe not enough . Shall ponder this .

Page 4 of 12 FirstFirst 123456789 ... LastLast

Similar Threads

  1. GIS Yawl
    By CCBB in forum Michael Storer Wooden Boat Plans
    Replies: 512
    Last Post: 8th February 2015, 12:30 PM
  2. Navigator
    By Resination in forum WOODTURNING - PEN TURNING
    Replies: 12
    Last Post: 6th January 2010, 02:04 PM
  3. Magma Navigator
    By Resination in forum WOODTURNING - PEN TURNING
    Replies: 14
    Last Post: 30th December 2009, 12:04 PM
  4. Figured Pink Ivory on a Gold Navigator
    By Matt88s in forum WOODTURNING - PEN TURNING
    Replies: 15
    Last Post: 17th May 2008, 10:24 PM
  5. Caledonian Yawl Plans
    By Donald in forum BOAT BUILDING / REPAIRING
    Replies: 1
    Last Post: 9th February 2004, 10:10 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •