Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2008
    Location
    Hobart
    Posts
    153

    Default Increase Spar Lengths and Sail Size?

    I am building an Oughtred Guillemot. The plans state that the boat is 11 feet 5 inches but the kit I purchased had 1 inch added to each of the stations making my boat 12 feet.
    The plans have spar lengths and sail dimensions for the standing lug rig I am going to use. As my boat is some 7 inches longer I am going to increase the length of the spars and the size of the sail proportionally to this increase in size. Is this necessary and if so is the exercise as simple as just increasing all lengths (the three spars and the four sides of the sail) proportionally.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Sep 2012
    Location
    NSW, Australia
    Posts
    474

    Default

    For the tiny increase in length, you'd notice no difference with the standard rig, unless you were racing and timing things to the nearest tenth of a second. I'd just build it with the standard rig. My 2c.

    ETA: Compared to a standard hull, with the same rig, yours would be theoretically slightly slower in very light winds, and slighter faster in stronger winds, with a little bit more stability. You'd hardly notice most of the time, though..

  4. #3
    Join Date
    Feb 2008
    Location
    Eustis, FL, USA
    Posts
    2,270

    Default

    Agreed the additional length isn't a significant amount, so the stock rig would be logical. Though a 5% length increase is made, the sail carrying power isn't affected much, because the beam and draft remain the same. You'll gain a slight longitudinal stability increase, but very little additional sail carrying power, so . . .

Similar Threads

  1. sail size for canoe
    By HELLICONIA54 in forum KAYAK & CANOE BUILDING
    Replies: 5
    Last Post: 1st March 2011, 08:41 PM
  2. GIS Sail and Spar Plan
    By Dennis M in forum Michael Storer Wooden Boat Plans
    Replies: 3
    Last Post: 3rd September 2009, 11:37 AM
  3. Pen Tubes - BULK Lenghts
    By Jiminidaho in forum WOODTURNING - PEN TURNING
    Replies: 18
    Last Post: 26th November 2007, 02:54 AM
  4. Increase Notepad size
    By Black Ned in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 3
    Last Post: 21st June 2007, 08:43 PM
  5. Cutting tenons on long lenghts
    By DPR in forum TRITON / GMC
    Replies: 21
    Last Post: 22nd May 2006, 07:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •