New member today.
What is state of play with plans for Mirror 16?
Is the resurrection project still live?
Built a Mirror 10 30 years ago and fancy doing something similar but bigger that I can camp in.
Printable View
New member today.
What is state of play with plans for Mirror 16?
Is the resurrection project still live?
Built a Mirror 10 30 years ago and fancy doing something similar but bigger that I can camp in.
Are the plans available yet? Mar 1-2011.
I have picked up a Mirror 16 with a dilapidated hull. I intend to strip the hull and use the original parts as templates for new ones. I will also document each piece as I go.
Forgot to mention that I will be using the measuements from the stripped hull to update the 3D CAD model I have created. Drawings from this could be used by anyone who wants to build a new hull.
Hi,
I am looking for Mirror 16 plans to make a replica.
Would you accept to give me a copy of the plan you made measuring a dismounted M16.
Best regards.
Stéphane from France
Will these plans come available for sale ?
Hi,
I am currently dismantling a very tired Mirror 16 with the view to create a set of templates and rebuild the hull. Please feel free to PM me if you want further info.
Rod
A few photos to show progress to date.
Hi I'm from Melbourne Australia and would love to get plans for a Mirror 16 and if Possible a Mirror 10. My first yacht I built a Mirror 10 when I was 15!! great little boat!!
Sounds like lots of people have started measuring their Mirror 16's over the years, but seems like no one has ever finished - are they really so big that no one can measure whole thing, or is it just that no one can find tape measure that measures in feet and inches anymore ? :U
Full disclosure, I don't think I would get round to building one myself, but would be a shame to see the design go fully extinct.
If anyone does have the measurements laying around somewhere on the back of an envelope I'd be happy to have a go at drawing them up into something more useful, maybe something that could help someone who is going to build one.
I would also love to ge hold of a set of plans for a Mirror 16, as I grew up on one, and would love to build one. Has anyone actually achieved putting a set together.
I live n toowoomba, Qld, and currently sail a Hartley 21, and a Gwen, mainly on Moreton Bay
Hume
I have put a set of plans together. They can be downloaded from here: Mirror 16 foot Sailing Dinghy | Page 19 | Boat Design Net
I'm hoping to start building one in a couple of months (after I get my Hobie cat put back together and out of my garage). We'll see how that goes. There is a good chance that the plans might need to be adjusted once I get into the build. Mirror 16 Build | Boat Design Net
samibe
I am in the middle of repairing the transom, some floor, ribs #30, #31 and the rear flotation tanks on my Mirror 16.
I have downloaded the plans you have on the other forum.
In both of the plans (new and original) rib #31 is drawn with a straight edge against the hull.
However the hull on my Mirror has a curve similar to rib #30.
Are there any other Mirror 16 owners here who could check to see if there is a convex (outwards) curve underneath the hull about 24" forward from the transom.