THe Mangrove Jack 3.65

**b.o.a.t.** · 11th September 2011, 10:47 PM

couldn't see the video, but plenty of stills under your gallery.
Very nice indeed.
What was your final bare hull weight?
AJ

**vk4** · 12th September 2011, 08:02 AM

AJ,

Hull weight finished is 63Kg,

.

If you go to Marks Site ,
!. go to boat plans
2. power boats
3. select mangrove jack 3.65
4. you can see the video here.

Jeff
vk4

**vk4** · 16th September 2011, 07:55 PM

1 100_1615.jpg 00_1611.jpg

I hope these took here are PIC's of the finished MANGROVEJACK 3.65

Jeff
vk4

**vk4** · 20th September 2011, 09:31 PM

for those who are interested , here are 2 pic's of the boat on the water

**vk4** · 20th September 2011, 09:33 PM

sorry both the same , my error
Jeff

**vk4** · 22nd September 2011, 08:15 PM

Hi All,

Well I started to do a small modification on the BOAT, I have a Tohatsu 10Hp 2stroke about 10years old,.

The problem is that it's leg is a little longer than the standard short leg

, only about 4-5 cm's, this resulted in excessive spray from the back of the leg.

I have cleaned off the Paint and made an insert of laminated plywood (left over from the build),

which I have , glued and screwed to the transom, (screws removed after the glue had gone off.

Tomorrow I will sand back the insert, and epoxy and glass the transom

, then fill sand

and paint,.

Hopefully , I will be able to take it out next week to see how the modification goes.

Jeff

Thread: THe Mangrove Jack 3.65