Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    2

    Default Repairing dents in polished floors

    Help!!

    While moving into our house, which has freshly polished timber floors, we've had a minor disaster. One of the items we moved in was heavy, and on wheels.

    We since discovered that the wheels were not properly rounded and had a projection in the middle. This has resulted in grooves being made in our floors. The polish itself isn't cut up, but the timber has been compressed under the wheels. The floors are beech (supposedly fairly hard) and have been polished with polyeurathane (not sure if 1 or 2 pack). They are very glossy - which we understood was harder too.

    I've read about using an iron / damp cloths to re-expand the compressed timber. Would this be OK to do on polished floors - would the heat and moisture do more harm?

    Thanks in advance for any advice!!

    Rgds
    kkkkkkk

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2003
    Location
    Frankston-Langwarrin VIC
    Age
    61
    Posts
    477

    Default

    At best, a new coat over the top will do a fair job of hiding the "snail trails" you have made. However, it will still be visable under the fresh coat.

    Don't bother mucking about with Martha Stewart type solutions.. like ironing out the dents....which is fine on small dents on furniture and stuff, but not on floors.

    At worst, if you want your floor back to perfect it will require re-sanding and coating.

    Check your insurance policy it might allow you to make a claim on damaged flooring.

    Good luck.

  4. #3
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,475

    Default

    As Dusty said

  5. #4
    Join Date
    Jan 2006
    Location
    Melbourne
    Posts
    722

    Default

    I've found that a satin finish is mcuh better at concealing marks and is especially good in old baltic pine floors etc. where they are quite soft and prone to dents etc.

    If as suggested above you were to add another coat you may consider going slightly less glossy?

  6. #5
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    2

    Default

    Thanks OBBob, China & Dusty for the advice. I suspected the ironing wasn't an option

    I guess we'll be doing the sand/recoat in a few months time.

    Cheers,
    kkkkkkk

  7. #6
    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    60

    Default

    Now that you've moved in it will be a nightmare to move everything out, re-sand and re-polish.

    Live with it for a month or two and you'll probably find you get over the disappointment of it.

    Floors never look immaculate for long, even in the best kept homes.


    ..... and if you invite us all round we promise not to mention it.

Similar Threads

  1. Treatex- Hard Wax Oil For Floors??
    By cheeky0_10 in forum TIMBER
    Replies: 1
    Last Post: 26th October 2006, 10:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •