Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
22nd October 2007, 06:32 PM #1
Novice
- Join Date
- Jun 2007
- Location
- Melbourne
- Posts
- 12
Maximal size for single piece granite / manufactured stone for island bench
I have planned for a 1.2 x 2.1m island bench, including 0.3m overhang on the long side. Just curious if this is too big for a single piece of stone top? Just don't think it'll look good with a obvious joint down the middle...
-
22nd October 2007 06:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd October 2007, 06:39 PM #2
Senior Member
- Join Date
- Jul 2004
- Location
- Singleton NSW
- Age
- 69
- Posts
- 355
No
I have just had a stone benchtop the same size cut. It was cut out of a slab about 1.5 Mtr X 3.3 Mtr
woodcutta
-
22nd October 2007, 08:00 PM #3
Senior Member
- Join Date
- Oct 2005
- Location
- newcastle
- Posts
- 356
hiya , the size is fine, engineered stone will be no problem, but if it has a sink cutout in it, then the type of granite and the examples thye have can possibly cause a problem. the best person to ask for natural stone is a stonemason when you know exactly what you want, and they can check the quality of what they have versus the place you want the sink, how close to the edge, etc etc.
Similar Threads
-
How to Sharpen a Plane Blade Part 3: How to sharpen the front side freehanded.
By soatoz in forum JAPANESE HAND TOOLSReplies: 6Last Post: 16th May 2009, 08:46 AM -
How to Sharpen a Plane Blade Part2: How to sharpen the front side.
By soatoz in forum JAPANESE HAND TOOLSReplies: 6Last Post: 24th March 2007, 01:01 PM
