Thread: Painted Internal Brick Walls

plaster board, sorry it's the only way

Originally Posted by Gumby

plaster board, sorry it's the only way

Plasterboard, sorry.


It's the only way.

Unless you want to sandblast the bricks and enjoy the natural colour for a while.

P

Originally Posted by bitingmidge

Plasterboard, sorry.


It's the only way.

Unless you want to sandblast the bricks and enjoy the natural colour for a while.

P

Is there an echo in here ???

How thick would the battens on the wall need to be in order to nail the plasterboard to? We've got exposed brick walls in the back room and kitchen and we were just thinking of bagging them, but plasterboard may be an option as well.

solid plaster will not stick to a painted wall

likewise you cannot direct stick gyprock to painted brick so you have to use battens 15 - 20mm

Cheers Ian

Originally Posted by Ian007

you cannot direct stick gyprock to painted brick

Unless you shoot/nail/screw into the brickwork as well.

P

but why would you?

Originally Posted by bitingmidge

Unless you shoot/nail/screw into the brickwork as well.

P

Hmmm my fave, as it makes lots of noise, and make ya feel all sort of macho.
Specially if you use an over charge, and it goes right through the wall.

Al

Originally Posted by Ian007

but why would you?

See Ozzo's post above !

It also gives the renovators 20 years from now a chance to bring it all back to what it was like before the brickwork was tastelessy covered up.

Can you imagine some yuppie kids in 2025 eagerly peeling off the dead plasterboard, and scraping the paint back to discover the original 70's wire-cut bricks underneath all that?? They'll think they've won Tattslotto!!

Cheers,

P

Originally Posted by bitingmidge

Unless you shoot/nail/screw into the brickwork as well.

P

I want to see you Shoot thru gyprock into brick

or even nail or screw straight thru gyprock in to brick.

this i just gotta see :eek:

I think I would Pee myself laughing

Ian

Ps I think ive got how to do it,
its fire rated gyprock 26mm thick double layered right

Glue the plasterboard to the bricks.
Its only glued to studs in timber frames and not nailed.
Just take a few sections of paint off the wall back to bare brick with a wire brush in a drill.

ya, seeing as though it's not a wet area, from memory you can just use adhesive to glue the p/board to the walls and finish them off with paint. (also if you go glue option, you can't tile the walls)

i'm currently doing my laundry with p/board before tiling it to get a smooth tiling surface, and isn't that hard at all... (but i've installed battons up first)..

have you considered giving the walls a bagging type finish? might be something different / nice?

D

Originally Posted by Ian007

I want to see you Shoot thru gyprock into brick
or even nail or screw straight thru gyprock in to brick.

Note at no stage did I say I would do this!! I DID say YOU!


All of the above (OK shooting is a bit extreme) are quite easy to do if you nail or screw straight into the beds or perps, remember you are only holding the stuff in place till the glue goes off.

And yes as pointed out above, scratch the paint off before dolloping the glue on, or if it won't come off that's good!

Cheers,

P

another option is a 'readiwall', which is just a masonite sheet. 5.5mm thick, you can just glue to the wall or nail etc. Thinking of it myself; although I havent quite figured out what you do with the joins. Probably put in no gaps or something.

It is a bit more expensive that gyprocking tho. The benefit are no stuffing around with plastering and take up less room (albeit not much - 5.5mm vs say a 10mm gyprock sheet). I also suspect its a bit easier to work with, if you have no gyprock experience. On the other hand, its a wood product and so looks different to gyprock.

see here

http://www.australianhardboards.com..../readiwall.htm