Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: staining tasi oak/vic ash
-
1st November 2007, 10:38 PM #1New Member
- Join Date
- Nov 2007
- Location
- Melbourne
- Posts
- 1
staining tasi oak/vic ash
I've been watching these forums for a while and have learnt some great stuff, so i thought I'd ask a question of my own,
I have to stain tasi oak/vic ash? to match some cedar windows. The colour match is good but when I apply solvent based stain the grain in the tasi oak absorbs it more in some places than others, highlighting it and making it stand out from the cedar more than I would like.
Is there a way to stain tasi oak more evenly? What I'm after is to darken the tasi oak evenly and then apply a topcoat.
Should I be looking more to all-in-one stain & vanishes rather penetrating stains. Anyone have any advice for staining tasi oak?
Thanks
-
1st November 2007 10:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd November 2007, 08:40 PM #2
I'm not an expert on finishing but blotching is not uncommon on many timbers. The accepted wisdom varies a bit but basically you need to apply a sealer coat of something so that the stain is more even.
The most often advised sealer is is a very thin shellac.
Similar Threads
-
staining mountain ash
By astrid in forum FINISHINGReplies: 9Last Post: 25th October 2007, 07:16 PM -
Making chisel handles from Ash wood.
By JJK in forum WOODWORK - GENERALReplies: 10Last Post: 23rd October 2007, 06:07 PM -
dark cherry on vic ash with photo
By certifi in forum FINISHINGReplies: 11Last Post: 23rd September 2007, 01:59 PM -
White Ash Drawers
By syntec4 in forum WOODWORK PICSReplies: 5Last Post: 14th November 2006, 02:14 PM -
Golden Ash - American Ash ???
By Harry Atkinson in forum TIMBERReplies: 12Last Post: 3rd June 2005, 04:59 PM