Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: New Cicular Saw
-
23rd July 2006, 03:25 PM #1Intermediate Member
- Join Date
- Jul 2006
- Location
- Sydney Australia
- Posts
- 42
New Cicular Saw
I am in the need for a circular saw around 800watts. I have a 2000watt but I need to run it off a geneartor which only supports a constant power rate od 2200watts.
I saw the Ozito used to make n 800watt one, the CSG-462, but I have not been able to find it anywhere.
Are there any others avilable?
-
23rd July 2006 03:25 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd July 2006, 03:52 PM #2
Forget the ozito they're rubbish.
Because a hand held saw starts under no load you should be able to reliably run a 1200 watt saw from the generator
(even though recommended practise is 1/3rd of genset output rating on a petrol genset. On a diesel genset 1/2 of output is ok)
There is a 1200watt GMC available, nice little saw to use.
-
23rd July 2006, 04:06 PM #3Intermediate Member
- Join Date
- Jul 2006
- Location
- Sydney Australia
- Posts
- 42
New Circular Saw
Originally Posted by echnidna
I don't want to cut massive beams just ply and mapple some half inch thick mapple and he like. I thought of a battery powered saw but these won't fit in a table would they?
Since I have not bought the saw as yet I don't want to buy it and attempt to run it any it does not have enough power to cut.