Thread: Tasmanian Oak

G'day Aberdeen,

Most Tas Oak (marketing name for several distinct species of Ash & whatnot - this has been discussed several time on this forum; I'd suggest a search) is kiln dried, so I suspect that if it were to get wet, nasty things might happen.

Fo small boats/yachts, Cedar is often used for stringers; don't know about Western Red Cedar for this purpose.

I'd suggest asking around small boat clubs, old fashioned boat yards, etc.

Sorry not to be of much help.
Cheers!

Thanks Steve B
I will try a search on the forum.

Have time to sort things out

Spotted Gum mate, the heart of many a good boat.

Now I have actually heard of Spotted Gum.
Next thing is to find suppliers here in good old Adelaide.
I assume it doesn't cost an arm, leg, outboard motor.

Thanks

I've finally found some information on Aussie timbers suitable for boat building..... will keep hunt thru own interest in this subject and it may be of help to someone?

BLUEGUM (H) (OS)
Bluegum, or Sydney Blue Gum (Eucalyptus saligna), occurs naturally from Southern NSW to South Qld. Durable. Suitable for general building, cladding, flooring, boatbuilding, furniture, plywood. One of the species grown extensively in plantations in South Africa, plus Hawaii and New Zealand.

KARRI (H) (OS)
Karri (Eucalyptus diversicolor), is native to south-west Western Australia. It is one of Australia's tallest hardwood trees. Larger formats and clearer grades are more likely to be old growth (see note). Heartwood is moderately durable. Suitable for flooring, panelling, structural plywood, shipbuilding. Mature plantation sources are still very limited.

OREGON (E) (S)
Oregon (pseudotsuga spp.) or Douglas fir, is native to eastern America, from Mexico to British Columbia. On this side of the world, it is grown in plantations in western Victoria and New Zealand (in limited quantities). It can be used in applications both above-ground and where exposed to the weather. Mature virgin forest Oregon is classed as durable; however, the plantation product, if exposed to the weather, must be adequately waterproofed and maintained. This plantation-grown variety has a looser grain than the Canadian and American (old growth) versions and does not have such high load-bearing qualities. Used for structural framing, joinery, vats, boatbuilding.

SPOTTED GUM (H)
Spotted Gum (Eucalyptus maculata) occurs naturally on the poorer clay subsoils of the east coast from the Vic-NSW border to the Maryborough district in Qld. Heartwood is durable. Suitable for heavy piles, poles, shipbuilding, agricultural machinery, flooring, plywood, axe handles.


HOOP PINE (S)
Hoop Pine (Araucaria cunninghamii), also called Dorrigo Pine, Colonial Pine, or Arakaria is a rainforest timber, native to northern NSW, Queensland and the mountain regions of PNG. It is the only native tropical timber grown in substantial quantities in plantations within Australia. Hoop Pine is available on the NSW market as plywood, mouldings, sawn timber and slabs. Queensland has extensive Hoop Pine plantations which are now mature. Building Applications for Hoop Pine
To avoid distortion, framing sizes should be high-temperature dried
Uses
Boat building (masts, planking, deck beams, frames, marine plywood), aircraft construction, wood wool, paper products, arrow shafts, broom handles, cooperage, beehives, brushware, dowelling, blind rollers, draughting implements, boat oars, musical instruments (violin and guitar bellies), scaffold planks, match splints.

Originally Posted by Aberdeen

I've finally found some information on Aussie timbers suitable for boat building..... will keep hunt thru own interest in this subject and it may be of help to someone?

BLUEGUM (H) (OS)
Bluegum, or Sydney Blue Gum (Eucalyptus saligna), occurs naturally from Southern NSW to South Qld. Durable. Suitable for general building, cladding, flooring, boatbuilding, furniture, plywood. One of the species grown extensively in plantations in South Africa, plus Hawaii and New Zealand.

KARRI (H) (OS)
Karri (Eucalyptus diversicolor), is native to south-west Western Australia. It is one of Australia's tallest hardwood trees. Larger formats and clearer grades are more likely to be old growth (see note). Heartwood is moderately durable. Suitable for flooring, panelling, structural plywood, shipbuilding. Mature plantation sources are still very limited.

OREGON (E) (S)
Oregon (pseudotsuga spp.) or Douglas fir, is native to eastern America, from Mexico to British Columbia. On this side of the world, it is grown in plantations in western Victoria and New Zealand (in limited quantities). It can be used in applications both above-ground and where exposed to the weather. Mature virgin forest Oregon is classed as durable; however, the plantation product, if exposed to the weather, must be adequately waterproofed and maintained. This plantation-grown variety has a looser grain than the Canadian and American (old growth) versions and does not have such high load-bearing qualities. Used for structural framing, joinery, vats, boatbuilding.

SPOTTED GUM (H)
Spotted Gum (Eucalyptus maculata) occurs naturally on the poorer clay subsoils of the east coast from the Vic-NSW border to the Maryborough district in Qld. Heartwood is durable. Suitable for heavy piles, poles, shipbuilding, agricultural machinery, flooring, plywood, axe handles.


HOOP PINE (S)
Hoop Pine (Araucaria cunninghamii), also called Dorrigo Pine, Colonial Pine, or Arakaria is a rainforest timber, native to northern NSW, Queensland and the mountain regions of PNG. It is the only native tropical timber grown in substantial quantities in plantations within Australia. Hoop Pine is available on the NSW market as plywood, mouldings, sawn timber and slabs. Queensland has extensive Hoop Pine plantations which are now mature. Building Applications for Hoop Pine
To avoid distortion, framing sizes should be high-temperature dried
Uses
Boat building (masts, planking, deck beams, frames, marine plywood), aircraft construction, wood wool, paper products, arrow shafts, broom handles, cooperage, beehives, brushware, dowelling, blind rollers, draughting implements, boat oars, musical instruments (violin and guitar bellies), scaffold planks, match splints.

King William Pine (aka King Billy) is very well suited as is Huon Pine.

Thanks 4 that.
King William Pine, is that a Tassie, mainland or elswewhere timber?
I am aware of Huon Pine but thought that was getting very rare/hard to get and quite expensive - or is my ignorance unfounded?

Glenn in S.A.

Originally Posted by Shedhand

King William Pine (aka King Billy) is very well suited as is Huon Pine.

Originally Posted by Aberdeen

Thanks 4 that.
King William Pine, is that a Tassie, mainland or elswewhere timber?
I am aware of Huon Pine but thought that was getting very rare/hard to get and quite expensive - or is my ignorance unfounded?

Glenn in S.A.

Expensive....no.....only $3.18 for a pack of 15 seeds http://www.forestrytas.com.au/forest...d422611b6667ba ......might have to wait at least a couple of hundred years before you can use it though.

King Billy is getting harder to get, our traditional huon pine millers on the west coast still mill it when they can obtain supply, price is the same as huon pine.

Check this site for a picture of the timber http://www.indeco.net.au/kingbilly.htm I've sold some in the past to a couple of kayak makers.

regards

Kev M

Well I had better not wait then, can I order 6 pkts of seeds

Howdy Aberdeen,

For a boat like the Hartley you don't need to use hardwood like spotted gum, bluegum, karri.

They are all too strong for the loads in a Hartley so you would just be adding quite a lot of weight for no good benefit.

Most boats of the era were framed in Meranti - the smarter builders used the red stuff which has quite good rot resistance, whereas the pink or whitish stuff rots out quickly. Though if you go the epoxy route you can pick a non-durable timber - even the whitish meranti.

Meranti has much more expensive in recent years (like almost everything else) and there seems to be less of the red stuff round.

If you use oregon or hoop (or other timber of similar density) they will save you quite a bit of weight for better speed and fuel economy, cut the sweating when you are working them and the boat will be heaps strong enough.

I would do comparison costing between Hoop, Oregon and Meranti - and also look at other timbers that Timberyards may have in stock. Reasonably clear (cut between the knots), straight grain, good gluing properties, similar density.

If going the epoxy route you don't need to have permanent fastenings (screws and nails) - which can save a bit too.

Michael Storer

HOOP PINE (S)
Hoop Pine (Araucaria cunninghamii), also called Dorrigo Pine, Colonial Pine, or Arakaria is a rainforest timber, native to northern NSW, Queensland and the mountain regions of PNG. It is the only native tropical timber grown in substantial quantities in plantations within Australia. Hoop Pine is available on the NSW market as plywood, mouldings, sawn timber and slabs. Queensland has extensive Hoop Pine plantations which are now mature. Building Applications for Hoop Pine
To avoid distortion, framing sizes should be high-temperature dried
Uses
Boat building (masts, planking, deck beams, frames, marine plywood), aircraft construction, wood wool, paper products, arrow shafts, broom handles, cooperage, beehives, brushware, dowelling, blind rollers, draughting implements, boat oars, musical instruments (violin and guitar bellies), scaffold planks, match splints.

My old man and I use to go through about 25 cubic metres a month of hoop making beehives, bee frames etc. (Not bad for a three man outfit ). Hoop is a great timber to work with. The timber is relatively light and it is not too hard to get long lengths of clear timber in a huge range of sizes. When I get around to starting the Eureka canoe I will be using hoop for all of the needed solid timber components. It is also reasonably priced, bit more than crapiata and comparable to meranti.

Mik & Rowan
Seems you guys are on the same parallel, also Ted from the 'Duckery' reckons Hoop is the best option, both quality, weight and price.
I assume it holds epoxy well?

So guess what - I'll go with the audience and use Hoop. Will be using Hoop ply anyway, had that to build Rusty and was very happy all round. Might be a bit heavier than some of the other options but a lovely consistent finish.

Reckon if I can get thru building the 15 footer anywhere near as nice as the first 3.3m then the 24 foot one shouldn't be that hard.... would have had lots of practice by then...... just gotta find a bigger shed before I retire

Glenn down south