Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
12th April 2008, 07:04 PM #1
Water, water everywhere but not a boat in sight
Sorry to intrude on hallowed ground with a non boatie question, but the blokes in the timber sub-forum thought I might get an answer here.
I'm about to build a small, outdoor Japanese bathroom, and need some timber for the wooden tub. (Wood heated)
I ran across a mention of cypress as being suitable on a US site, which surprised me a bit. It's been suggested that Cypress macrocarpa might be a suitable, less expensive local option than western red cedar or jarrah. (If I absolutely have to go with the more expensive option then I will, it'll just put the project back a couple of months)
Can I have your thoughts on timber that will stand up to being continually wet? And that hopefully won't show too much damage on the dry portion above the water line of the tub?
Many thanksIncoming
Never eat prunes when you're hungry
-
12th April 2008 07:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th April 2008, 08:09 PM #2
Burmese Teak . . .
-
12th April 2008, 10:14 PM #3
Huon
www.denmanmarine.com.au
Australian agent for Swallow Boats, Bruynzeel Multipanel Plywood and Barton Marine Products
-
13th April 2008, 12:01 AM #4SENIOR MEMBER
- Join Date
- Apr 2007
- Location
- Arundel Qld 4214
- Age
- 86
- Posts
- 701
Timber for Japanese bathroom
Do some of your own research on Paulownia. I am biased as I grow, mill and sell it but from my understanding it as good if not better than WRC and I sell it cheaper than WRC. Paulownia is very light in colour which is better for small confined areas.
-
13th April 2008, 07:59 PM #5SENIOR MEMBER
- Join Date
- Jan 2008
- Location
- Nth Est Victoria, Australia
- Posts
- 605
Huon pine, celery top pine, blue gum, red gum, white beech, spotted gum, tallow wood, etc.
-
14th April 2008, 07:44 AM #6
Thank you for that. Will do some more reading.
Incoming
Never eat prunes when you're hungry
-
14th April 2008, 01:46 PM #7
Howdy,
If you are looking at timber that is to be kept wet - look at the traditional timbers used by Coopers in Australia.
Normally you wouldn't use glue for joining timber that is to be kept wet - so their methods would work well too.
Best wishes
Michael
-
14th April 2008, 04:57 PM #8
Similar Threads
-
Is Water Based Polyurethane water proof when dry?
By Alfred in forum FINISHINGReplies: 6Last Post: 23rd October 2005, 12:39 AM