Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: WRC or Mahogany?
-
23rd August 2006, 10:14 AM #1
WRC or Mahogany?
Hi,
I am (hopefully) into the final planning stages of my boat before I start building...down now to the :eek: budgeting:eek: ! I tried to avoid it, but need to plan the spend (and discuss the ROI with the CFO ).
Whilst the boat will be cold-molded for strength (and as it will live out of the water), I am interested in sheathing the outside with a 'veneer' (maybe 3 - 5 mm thick) layer of timber - partly as I have spoken to local marine ply suppliers and I can't get mahogany ply in the foreseeable future. This may change and solve my problem.
Failing that, I will use mahogany or WRC. A local yard said they may be able to get african mahogany, but more likely plantation-grown Fijian mahogany. It's about $3100 a cube, WRC is about $4500 a cube.
They said the Fijian stuff is a lot softer than other mahog, as it's younger. Is this still suitable for boat work, or would I be better off paying for western red cedar? Original boat I am copying was mahogany. Or, should I just stain gaboon ply??:confused:
Thoughts from people who have used either much appreciated! And obviously choice will impact on cost as I'll need a bit.
Thanks,
Darrn
-
23rd August 2006 10:14 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd August 2006, 11:39 AM #2
Hi Darrn,
The physical properties of timber are roughly in line with the density (kg per cubic metre).
So if Western Red Cedar is OK and the Mahogany is the same or higher density it would almost certainly be OK.
Using real timber for the outside veneer makes sense as the fairing process might go through the first veneer of ply - making an unsightly job.
Gaboon is not many shades of colour different from much WRC - always a bit reluctant to stain big areas - like a boat's topsides - it is exactly the same as watercolour painting - one mistake and you have to live with it.
Though you can put the tint in the varnish (and some tints in the epoxy) to darken the appearance - you also reduce the clarity of the coating so the grain is not the feature that it can be if the coatings are clear.
MIK
-
23rd August 2006, 05:29 PM #3
Have a look at Surian Cedar. I have no idea what species it is, and you'd have to select the colour carefully, but it's light and a rich red colour if you get it right. I've never been able to find out what species it is.
It's a bit furry to work, but once coated sands nicely.
I think it's heaps cheaper than Mahogany or WRC too.
Cheers,
P
Similar Threads
-
Sorting Aus Cedar from WRC and mahog
By Arron in forum TIMBERReplies: 2Last Post: 19th July 2004, 07:39 PM -
Heard of Northern Mahogany?
By Ben from Vic. in forum TIMBERReplies: 2Last Post: 22nd March 2004, 10:34 PM -
African Mahogany - a possible plantation timber for tropical Australia
By Rocker in forum TIMBERReplies: 3Last Post: 30th October 2003, 07:18 PM -
African Mahogany (locally grown) - Bowl
By Little Festo in forum WOODWORK PICSReplies: 5Last Post: 29th October 2003, 11:01 PM -
Mahogany - does quality depend on source location?
By Anh-Dao Vlachos in forum TIMBERReplies: 7Last Post: 31st August 2002, 10:06 PM