Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2004
    Location
    Canberra
    Age
    65
    Posts
    417

    Default When can I paint render?

    Just had the interior walls (brick) of my workshop rendered. It will be a week tomorrow. Can anyone offer advise of when it can be painted.

    I spoke to the renderer - he says some builders will get painters started the next day which sounds too soon. When is a reasonable time to paint?

    Cheers
    The Numbat is a small striped marsupial whose whole diet consists of termites.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2004
    Location
    Sale
    Age
    68
    Posts
    1,328

    Default

    you only use water based paints, which actually does allow some moisture to pass through. You can probably paint now there shouldn't be a problem

    John

  4. #3
    Join Date
    Apr 2006
    Location
    sydney
    Posts
    10

    Default who knows!

    I understand your dilema about when to paint new render, i've been rendering for 12 years, i stil get the varied information some biulders say you paint in a couple of days, some say 3-4 weeks.

  5. #4
    Join Date
    Jul 2004
    Location
    Canberra
    Age
    65
    Posts
    417

    Default

    Thanks for the reply guys - I have decided to wait for 28 days before I paint with water based paint.

    Cheers
    The Numbat is a small striped marsupial whose whole diet consists of termites.

  6. #5
    Join Date
    Jul 2003
    Location
    Near Bodgy, AlexS, Wongo & CraigB
    Age
    18
    Posts
    2,666

    Default

    wait 6 weeks or so - let it cure properly, in colde waether it may take longer.

    I suggest at least 6 weeks. remenber it doesnt dry - the chemical reaction is what takes place. once its fully set paint away. make sure any wet sopts are dry too (such as leaking taps, condensation - sprinkler stuff etc... I had a leaking pool pump that sprayed a fine mist om the inside of the brick wall and the bricks sucked up the water and infected the render - I had to wait longer for this to dry out too...

    WHen I started to paint my render I actually wet the render again with the hose (reaonably wet) and did the first coat- the roller runs better on the rough surface, the paint is absorbed into the render better and forms a seal and the second coat goes on like a dream. my first coat I used 3 x 15l tins, the second coat used less than 2 x 15ltre tins.
    Zed

Similar Threads

  1. paint removal
    By Daddles in forum BOAT BUILDING / REPAIRING
    Replies: 11
    Last Post: 3rd August 2004, 10:42 PM
  2. If QANTAS sold paint ...
    By DaveInOz in forum WOODIES JOKES
    Replies: 2
    Last Post: 31st January 2003, 05:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •