Thread: Best material for packing bearers ?

First work out whether the concrete stumps will continue to sink.

I would use something that doesn't compress that much like steel plate or even very dense hardwood.

I used bits of old hardwood as I thought it would be "pre shrunk" and used pieces of Firbo for fine adjustment.

Also remember to leave doors open when you are jacking, otherwise you may find they jam ect...

Hardwood wedges - gives you the opportunity to adjust them if you post does move again, IE just tap the wedge further in.

2 wedges per post - running in line with the bearer - coming from opposite directions.

Concrete stumps should not sink.
I suspect they were not installed correctly, you should dig down alongside and see if they are sitting on clay or sand. They may just be sitting on a silty subsoil which can go like plasticine in the wet weather.
If so you need to dig to clay or sand and concrete them in situ (at the right height)

Originally Posted by echnidna

Concrete stumps should not sink.
I suspect they were not installed correctly, you should dig down alongside and see if they are sitting on clay or sand. They may just be sitting on a silty subsoil which can go like plasticine in the wet weather.
If so you need to dig to clay or sand and concrete them in situ (at the right height)

Sounds about right