Thread: setting out profiles and hurdles

Have you ran a water level over the existing back section?

See how far out it is from one side to the other?

A photo would be good?

Really a dumpy would be better as its easier/faster to pick up heights by sight.
Probably cheaper to hire as well.

http://www.buildeazy.com/plans/helpfiles_profile.html

A couple of bricklayers blocks on the profiles makes it easy to shift the lines back and forth to help align with the house. Once theyre in the right place mark with a pencil then tap in a nail so you don't lose the alignment.

Make sure the stakes for the profiles are well in or they will shift quite easily.

Once you have the height for the outside pegs you can set up height and alignment string lines off the outside pegs.

Certain hardware stores and actually TAFE bookshops such as Leederville may have some very good carpentary books which will help you with this.
It really is worth having a read prior to jumping into it.

What are you using as new stumps? 250 O/D PVC pipe concrete core filled with 10mm rods?

Originally Posted by autogenous

Have you ran a water level over the existing back section?
[...]
Really a dumpy would be better as its easier/faster to pick up heights by sight. Probably cheaper to hire as well.

You'd hire a water level? And ya reckon a dumpy would be 'cheaper to hire?'



Sorry, but that's a hoot! Still, it's good advice except for the above... errm... aberration.

Skew,
I think he means that it would be cheaper to hire a dumpy, than buy one.

Is is even possible to hire a water level It would almost be like hiring sunlight

Yeah, I know.

I was just having a giggle at how it seemed to read.

In reference to:

... rather than worrying about having to hire a laser level.

I thought he meant it was cheaper to hire a dumpy than a laser level, so there you go.

autogenous, did you mean?

this is what I do for a hurdle.

You can use timber stakes but still screw the cross piece as nailing knocks it around too much.

sorry pix following

what am I doing wrong Picture won't load?
I've tried 4 times It says done but when I submit it doesn't show

Originally Posted by rat52

what am I doing wrong Picture won't load?
I've tried 4 times It says done but when I submit it doesn't show

Your pics may be too large. Reduce them in size and they should load. I think pictures have to be 100kb's or smaller to upload to the site.

I did reset the file size on the camera because the last time I tried, the browser told me it was too large. This time it said 'done' but nothing showed in the preview or when I posted.As I said I tried 4 times and It must be something I did as we all know computers don't make mistakes

I will go now as I don't want to hijack this thread but if some one can pm me an answer I would be grateful

Originally Posted by rat52

I did reset the file size on the camera because the last time I tried, the browser told me it was too large. This time it said 'done' but nothing showed in the preview or when I posted.As I said I tried 4 times and It must be something I did as we all know computers don't make mistakes

You will have to reduce the size of the picture if it is too large with resizing software. There are many free programs available to do this. If you are using XP there is a free download from Microsoft called Image resizer which is a shell extension. Read more and download HERE