Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Dec 2009
    Location
    Glenbrook NSW
    Age
    74
    Posts
    72

    Default A problem of age

    How much does a codger put up with?

    From reading the plans and all the way through draughting onto the plywood, measuring, pattern making, sawing. . . etc. . . etc. Every step requires one vital decision.

    Do I use my multifocals, straight specs, reading glasses or no glasses?

    The boat will get built eventually, but will take much longer than when I was younger and I can only hope it doesn't end up looking like a 3D Escher diagram.

    Forget Kevlar drain plugs and the like, I need a real codger-friendly technological revolution.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Mar 2007
    Location
    Adelaide
    Posts
    2,139

    Default

    .........you forgot the magnifying glass and of course they will all be covered in saw dust so you can't see through any of them.

    Interesting, just as I read this thread the Grumpy Old Men TV show came on.

    OK what are you going to build and when will you start showing us.

  4. #3
    Join Date
    Jul 2005
    Location
    'Delaide, Australia
    Age
    65
    Posts
    8,138

    Default

    I guess the building will start when the glasses problem is sorted out!

    MIK

  5. #4
    Join Date
    Dec 2009
    Location
    Glenbrook NSW
    Age
    74
    Posts
    72

    Default

    Thanks for your interest.

    The boat is a Ross Lillistone Phoenix III. The plans supplied are fantastic quality and the building instructions are a good resource.

    The jig and moulds are ready, the serious timber is neatly stacked and I have just begun cutting ply for the bulkheads and major fittings.

    I looked at 3 sets of plans before deciding on the Phoenix. The GIS seemed easier for a first-time builder, but I wasn't really sure it was the boat I wanted to end up with. I also like the Wellsford Rogue, but the plans were more "a general idea of how to build a Rogue" and assumed a lot of knowledge that I don't have. In the end, the Phoenix III was the best combination of challenge and design.

  6. #5
    Join Date
    Oct 2009
    Location
    South Africa
    Posts
    950

    Default

    It's a good looking boat.

  7. #6
    Join Date
    Feb 2010
    Location
    UK
    Posts
    1

    Default

    Quote Originally Posted by Colin62 View Post
    It's a good looking boat.
    yes.. agree with you. nice boat.hehehe

  8. #7
    Join Date
    Feb 2008
    Location
    Eustis, FL, USA
    Posts
    2,270

    Default

    If you build without the assist of glasses, then your boat will not only look better (relatively of course), but joint making and part fitting will be loads easier as well so the build will be much faster. Naturally, you'll need to remain in the glasses off state or see the results of your efforts, but a serious consideration, none the less.

Similar Threads

  1. A little eye problem
    By Barry Hicks in forum WOODIES JOKES
    Replies: 0
    Last Post: 12th September 2007, 04:10 PM
  2. any one had this problem before
    By George G in forum WOODTURNING - GENERAL
    Replies: 7
    Last Post: 19th May 2007, 01:55 PM
  3. Got a little problem
    By Quokka in forum WOODWORK - GENERAL
    Replies: 24
    Last Post: 14th March 2005, 10:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •