Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    May 2006
    Location
    NSW
    Posts
    2

    Default Where do I start?

    I recently bought a great house with a horrible old asbestos shed. I am planning on replacing the old shed with a garden shed in a different location. I need something big enough to store a mower, a couple of bicycles and some gardening equipment but I don't want to build the taj mahal and I don't want to spend a fortune.

    I'd be interested in your opinions regarding design, what $$s I should look at, the best materials and:
    *whether I should get it built,
    *call in a favour from some handy friends (I don't want to stretch the friendship too far) or
    *go for a pre-fab and try to do it myself (remembering of course I haven't any experience with building but I'm willing to work hard).

    Thanks all.
    Josie

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2004
    Location
    Towradgi
    Posts
    4,839

    Default

    Josie, first of all check with your local council for all the pollava to do with what they allow you to build in your yard. Here in Wallygong council area, I am only allowed to build 3m x 3m structure without planning permission. To build larger it costs some 700 pancakes for permission. Be aware that a lot of councils use aerial photos to check for illegal buildings and most are making the occupants remove the structure now, not pay the planning fee after completion. The neighboorhood busy body is another source of info for councils too and you cannot beat them as council does not have to inform you of whom is informing on you.:mad:

    Also you will have be really careful removing the old asbestos shed. It could cost a few thou to have it removed or your life if you remove it yourself and scrimp/ take short cuts. The solid stuff is ok, double bagged, but the friable stuff <1mm is the stuff that can ruin your life. Plus getting a bin is a bit exe and all councils take a very dim view of people dumping it anywhere.
    Pat
    Work is a necessary evil to be avoided. Mark Twain

  4. #3
    Join Date
    Jul 2005
    Location
    Ipswich QLD
    Age
    54
    Posts
    1,166

    Default Starting

    yep i agree with pat on this one. Check the council regs out first before you do to much. My parents live just south of the Gong and they didn't have to many issues removing their old asbestos shed. I don't know the full ins and outs of it all, but they reckoned it wasn't to bad at all.
    Dave,
    hug the tree before you start the chainsaw.

  5. #4
    Join Date
    Oct 2003
    Location
    Sydney,Australia
    Posts
    3,157

    Default

    What Pat said. Your major difficulty/expense is going to be to get rid of the old fibro shed, not a new garden shed.

    A 3 m x 3 m 'Colourbond' shed is the standard NSW Council approved maximum garden shed - whack a few shelves inside & you'd be surprised what you can get in there. Most kit sheds go together with a screwdriver & hammer, maybe a ladder & a couple of friends to hold things in place as the walls & roof go up.

    Basically a 2 weekend project - weekend 1 - level site & lay base, wait a week for cement to set, sore knees to heal. Weekend 2 - whack shed together & bolt down, move shelving in, then gear. Have Barbie.

  6. #5
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    11,464

    Default

    Put the old shed on ebay for a dollar with buyer to remove.
    You might get lucky
    Regards, Bob Thomas

    www.wombatsawmill.com

  7. #6
    Join Date
    Jan 2006
    Location
    Melbourne, Victoria
    Posts
    84

    Default Victoria ..the Palace To Be..

    Recently state govt. has relaxed some need for permits or relaxed it..does anyone have details..move to vic, here they act every eight years..or nearly there..
    YOU MISSED 100% OF THE SHOT YOU NEVER TOOK.

Similar Threads

  1. If you table saw doesn't start, this might be the reason why.
    By JDarvall in forum TABLE SAWS & COMBINATIONS
    Replies: 11
    Last Post: 24th April 2006, 07:47 PM
  2. rouiter soft start
    By durwood in forum TRITON / GMC
    Replies: 11
    Last Post: 31st March 2006, 11:07 PM
  3. A start is made
    By Wild Dingo in forum BOAT BUILDING / REPAIRING
    Replies: 6
    Last Post: 17th October 2005, 11:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •