![Thanks](https://www.woodworkforums.com/dbtech/thanks/images/thanks.png)
![Likes](https://www.woodworkforums.com/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 31 to 44 of 44
Thread: one angry tiling mofo
-
30th July 2006, 12:18 AM #31
Member
- Join Date
- May 2006
- Location
- Sydney
- Posts
- 98
as someone pointed out it was purchased a reece plumbing supplies for $9.65 i think.
not bad and has a good lip height aswell.
-
30th July 2006 12:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th July 2006, 12:31 AM #32
Senior Member
- Join Date
- Mar 2004
- Location
- Melbourne
- Age
- 58
- Posts
- 254
I know it is too late now, but you can buy those cutters you put in a drill that is designed to cut circles, ive got a few and have drilled upto a 100mm hole in floor tiles before. Cost about $60
-
30th July 2006, 10:13 AM #33
Member
- Join Date
- May 2006
- Location
- Sydney
- Posts
- 98
Originally Posted by Guy
-
30th July 2006, 11:19 AM #34
Senior Member
- Join Date
- Nov 2004
- Location
- Melbourne
- Posts
- 185
come on drum I was waiting for a pat on the back about my great idea
-
30th July 2006, 01:26 PM #35
New Member
- Join Date
- Jul 2006
- Location
- Melbourne
- Age
- 48
- Posts
- 1
Hello all, I'm new to the forum but am impressed with the amount of good advice flying around.
I know this one has been solved in a round about way but if anyone ever come across this situation again (round waste in the middle of the floor) you should consider the following:
1/ Use the angle grinder to cut in from the back of the tile
2/ Use the nippers to rough out the hole close to the cut line
3/ Use a Dremel (or similar) to grind the cut out to a smooth finish.
Works a treat on ceramic tiles.
-
30th July 2006, 05:19 PM #36
Member
- Join Date
- May 2006
- Location
- Sydney
- Posts
- 98
Originally Posted by Dan_574
-
30th July 2006, 05:20 PM #37
Member
- Join Date
- May 2006
- Location
- Sydney
- Posts
- 98
Originally Posted by AaronH
cheers Jace
-
30th July 2006, 05:21 PM #38
Member
- Join Date
- May 2006
- Location
- Sydney
- Posts
- 98
Originally Posted by AaronH
-
30th July 2006, 05:35 PM #39
Whats you plan for cutting round the pipe, or have you done it already.
HJ0 Cheers
-
30th July 2006, 09:57 PM #40
Member
- Join Date
- May 2006
- Location
- Sydney
- Posts
- 98
Originally Posted by HJ0
I didnt want to have to cut around the pipe hole for the tub because the tub i have has a shelf in the bottom of the tub so you wont see the tiles any way.
This way i dont have to cut the tiles and i will save time and save tiles aswell.
I will just lay it on top of the tiles sorrounding the pipe and it will look flush. A bead of silicone around the bottom and we are good to go.
I thought this way would be easier and it will look flush. If i had put the tub in first i would have had all these cut tiles sorrounding the tub when tiling up to it and would have looked silly.
ill post some pics of grouting
-
31st July 2006, 01:37 AM #41
Np it's been done before, long as you are happy with the results who cares.
HJ0 Cheers Looking good
-
31st July 2006, 11:57 AM #42
Drummelars, I would be a bit wary of putting silicone around the trough cabinet at floor level, unless its a plastic cabinet.
If its metal I would leave the gap open to allow any moisture/condensation to dry out as metal cabinets rust.Jack
-
31st July 2006, 05:44 PM #43
Member
- Join Date
- May 2006
- Location
- Sydney
- Posts
- 98
Originally Posted by Jacksin
-
31st July 2006, 09:25 PM #44
Member
- Join Date
- May 2006
- Location
- Sydney
- Posts
- 98
Grounts in and lookin good for a first attempt.
not bad if i do say so myslef