Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
26th July 2007, 01:23 AM #1New Member
- Join Date
- Jul 2007
- Location
- perth
- Posts
- 9
Tiling advice - surface preparation
Hi everybody,
I have never tiled before and require advice wrt surface preparation for a kitchen splashback using ceramic mosaic tiles. So, here is a lot of dumb questions:
The existing substrate is what looks to be plaster, over the top of a dark grey, cement render kind of substance, which is applied over bricks.
There is a small (1m square) area where the old tiles used to be that is grey render only, as the old plaster may have come off when the old tiles were removed.
I know it's not rocket science, but what do I use to re-surface the plaster-like finish? Skim coat?
Also, there is a small area where the render has come away from the bricks. What do I use to fill this area in (it is about 1.5cm deep) - what is this stuff called?
Any advice is appreciated.
FishHead
-
26th July 2007 01:23 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many