Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 22
Thread: Book case
-
16th April 2006, 11:33 PM #1
Book case
Hi all,
This is a book case I started back in about November, been having a little trouble with Time Management. I am pretty happy with the results so far, but I have a Question.
I have just sprayed on a coat of Fungishield, & being among the worst sprayers in the land, I have a couple of runs I would like to sand back before staining & oiling. My Question is, If I lightly sand this unit now, will I need to re-apply Fungishield, or does it soak into the timber as stain does.
This bookcase relates back to http://www.woodworkforums.ubeaut.com...126#post216126
I have attached a couple of pics of progress so far.
Pic1. - Finished Sanding
Pic2. - Bottom Moulding reccessed for Skirting Board
Pic3. - 1 coat of Fungishield applyed & dryed
Pic4 - As pic 3
Thanks for your help on this one, While my finishing usually looks ok, I really have no idea what I'm doing. Must do a course I think.
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
16th April 2006 11:33 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th April 2006, 12:08 PM #2
Come on fellow woodies, somebody must know:confused:
The fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
17th April 2006, 02:06 PM #3
Hi Ticky, to be honest, I don't know. My suggestion - try a test piece and see what happens. I'd guess you'd need to sand back lightly and lightly coat again.
cheers
Wendy
-
17th April 2006, 07:44 PM #4
Thanks Wendy, I try not to let a little think like not knowing what I'm doing stand in my way, if I did, more than just my woodwork would suffer.
I had decided that would be what I would do, but at lease now, if it looks crappy, I can blame you. Good plan Hey
steveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
18th April 2006, 10:36 AM #5
Steve, I tend to forget to drop the pressure (and reduce the product) when I switch from "normal" stuff to something free-flowing - which I guess your fungishield is. Hence, I get runs.... Last bad experience was with Wattyl deck & furniture oil on an Adirondack chair - Ohhhhhh Hell! Thing is, you can't leave it like that so the runs have to be sanded out - but I guess that might still leave a layer if you sand real lightly? I was advised to reduce the pressure to 30psi (increase it a bit if necessary) and cut down the feed a bit. Hope this helps - it solved my problem with the chairs. Good luck.
-
19th April 2006, 12:54 AM #6
Murray, Thanks for the advice, I have given the unit a light sand with 1500 grit paper & a wipe down with a bit of turps. The Fungishield seems to have soaked into the timber very well & I can not forsee any problems.
I don't like staining, I never really feel like I know what I am doing when it comes to colour matching but I feel now that I may be at a point where I would be comfortable building out of something other than pine, so Maybe next time, I will start with the colour that I want to finish up with.
I am confident that it will turn out well, but at least if it doesn't I can always blame Wendy.
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
20th April 2006, 02:09 AM #7
Nearly Finished at last
A couple more photos of my bookcase. I have applyed 1 coat of stain today. The colour is not the perefect match I had hoped for, but better than I expected. It is still a bit light, but a few more coats should darken it up ok I think.
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
20th April 2006, 10:35 AM #8
-
23rd April 2006, 06:46 PM #9
Finished Staining
The end of this job is in sight. I love finishing a project, because it is almost time to start another. Not sue what yet, but maybe some cupboards for the shed.
I have finished applying the stain & now a couple of coats of oil & I think that will do.
Here are a few pics, hope you like them.The fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
23rd April 2006, 08:01 PM #10
Looks good Ticky, cupboards for the shed... me too soon.
Could you make your piccys a little bigger, they're about 4-5cm square on my screen and only 11kb you could afford to go too 30kb without bogging down dial'up users.....................................................................
-
23rd April 2006, 08:28 PM #11Originally Posted by Ticky
Originally Posted by Ticky
Whew! the bookcase looks good - no blame on me - or maybe I should take all the credit now
Great job Ticky!!
cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
24th April 2006, 12:45 AM #12
Bigger Pics
G'day Harry,
I was a bit concerned about making the pics too big as my camera is a 8 meg, but thanks for the advice. These are the same pics I posted earlier, but a bit bigger.
I am happy with the results so far, it is already faily glossy & I still have to oil it. The only trouble I have found with sanding so fine, is the timber doesn't seem to accept the stain very well. Am I right in my thinking?
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
24th April 2006, 01:24 AM #13.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
Ticky,
I really like the finish and the general design and it will hopefully inspire me to get started on my bookshelf project I have been meaning to work on for years. I am somewhat intrigued as to why you seemed to go for tall book shelves at the top and shorter book shelves at the bottom, usually one does it the other way around.
Cheers
-
24th April 2006, 08:05 AM #14
Tricky,
You said, " ....... I never really feel like I know what I am doing when it comes to ....... ".
Now that rang my bell 'cause it's my philosophy on life, and is the reason I use my on-line signature.
Well done. The books will be secure snuggled inside your work. I'm envious - not of the books, but your persistance.
soth
-
24th April 2006, 09:50 AM #15Originally Posted by BobL
I should have bent down & taken some of the shots, but bending is a bit of a trick for me, & I usually don't do it unless I have to.
Thanks for your comment, I will try keep that in mind with future shots.
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
Similar Threads
-
Router book review
By Grunt in forum ROUTING FORUMReplies: 4Last Post: 27th July 2017, 07:25 PM -
Free Bandsaw Instruction book
By paul.cleary in forum BANDSAWSReplies: 7Last Post: 9th May 2004, 10:21 PM -
Great book on routing
By ndru in forum ROUTING FORUMReplies: 2Last Post: 27th August 2003, 11:32 PM -
Book review - Collins woodworker's manual
By Grue in forum ANNOUNCEMENTSReplies: 2Last Post: 14th August 2003, 10:36 PM -
Rare Trades - Book review
By Grue in forum ANNOUNCEMENTSReplies: 2Last Post: 12th August 2003, 12:40 PM