Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 26
Thread: My Coffee Table.....
-
22nd December 2005, 09:18 PM #1
My Coffee Table.....
Thought I would start a new thread for this project.....
Well after so long I have finally done some more on my table...
Im still not happy with it yet,
I have done 3 coats of epoxy resin and there are still some little "Air breather holes" in the top.
I have placed it on top of my old coffee table temperory.
I have also noticed that the epoxy does scratch easily with remotes etc on top...
I think that i will give it another light sand back with very fine wet and dry and give it a coat of carbonathane to see if it is harder and fills up the few holes from the epoxy resin.
When i get time ill start to make the base which will hold remotes etc.
-
22nd December 2005 09:18 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
22nd December 2005, 10:10 PM #2GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
Looks like it is going to be a very solid table. I can't remember the original thread - what is the timber.
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
22nd December 2005, 10:40 PM #3
It's going to need a heavy styled base!
Good work Mutanti.....................................................................
-
22nd December 2005, 11:00 PM #4
The timber was old redgum sleepers, mate had them at the back of his shed for last 8 years or so...
-
22nd December 2005, 11:13 PM #5
Nice timber, but to me the epoxy makes it look very plasticky. Not sure if it's just the photo. Would polyurethane been easier, and with a more scratch resistant surface?
Those are my principles, and if you don't like them . . . well, I have others.
-
23rd December 2005, 02:50 PM #6
I'm with Zenwood, pity to spoil some nice timber with plastic.
Cheers
BarryIf it walks like a duck, talks like a duck and looks like a duck then it's a friggin duck.
-
23rd December 2005, 03:35 PM #7
As with Zenwood and Baz.
Methinks that plain old oil or shellac, followed by wax would be a nice finish for such lovely timber. Easier to tidy up any scratches too.
-
2nd October 2006, 10:20 PM #8
Finally got my but into gear and started making my coffee table. already cleaned up some timber and made rear section.
Found this free program thanks to google and did a quick drawing of what it will look like design wise, i have just thrown in a bit of marble just for the pic but timber should look good when im done.
I have decided to sand back the top and get the good ol carbothane out for it.
at this rate i might have it finished by the end of the year LOL
Talk about long term projects....
-
2nd October 2006, 10:33 PM #9
one more pic.....
i got free program from http://www.sketchup.com/?utm_campaig..._term=sketchup
if your interested...
-
3rd October 2006, 03:26 AM #10
Yep its a good simple program if thats your thing... not me a basic mud map is all I need!
I think most here have it.....................................................................
-
3rd October 2006, 09:45 AM #11
Hi Mutanti
I too found the epoxy left little breather holes in my Camphor Laurel kitchen bench - I think because I didn't seal the CL fully and finish working with the epoxy properly. I'm definitely not going to be using it as a finish again.
Don't worry about projects taking ages. I've got 4 very long-term projects (two years?) around the house in various stages of completion
I like your coffee table design
cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
6th October 2006, 08:27 PM #12
Hi.
Hi. I collect a lot a redgum. Fence knock downs and it kills me to cut em up for fire wood. I mill the posts and get bout 65mm sq. Still not made anything yet. But gee they come up great ha he. Well done.
Tony.
-
6th October 2006, 11:21 PM #13
-
7th October 2006, 10:56 AM #14
Hi Mutanti,
Interesting design for the coffee table. What is the void between the two pillars for? The top, which works as a lid, could be pretty heavy being redgum. Any kids in the house? Just watch for jamming of little fingers!
I'm with a couple of other replies here... don't go for the full-on epoxy finish myself, much rather a natural finish esp. on such rustic timber. Personal preferences. The free Sketchup program is good fun, just wish I could afford the full version.
Good luck with it!Andy Mac
Change is inevitable, growth is optional.
-
8th October 2006, 09:55 PM #15
Epoxy will be sanded and I have a tin of Carbothaine which will finish the top...
No kids in the house.......
Void will be for the odd magazine instead of being on top....
The whole idea is to get the remotes and other stuff of the top...
I did some more over the weekend . Got a lot more to do yet tho but its starting to get interesting again so Ill get more motivated...
Might be christmas before I get it done but i would rather take my time and make it the way I want it and not rush ...
Similar Threads
-
Finish options for Redgum coffee table?
By hamster in forum FINISHINGReplies: 9Last Post: 29th August 2008, 04:08 PM -
glass top for coffee table
By Gassito in forum WOODWORK - GENERALReplies: 1Last Post: 9th October 2005, 05:59 PM -
Rustic Coffee Table
By LineLefty in forum WOODWORK - GENERALReplies: 32Last Post: 22nd August 2005, 05:52 PM -
coffee table brag
By Wild Dingo in forum WOODWORK PICSReplies: 3Last Post: 18th July 2004, 01:52 AM -
Plans for a Pedestal Coffee Table
By barnsey in forum WOODWORK - GENERALReplies: 1Last Post: 12th August 2003, 09:54 PM