Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Custom Framing
-
6th January 2015, 07:56 PM #1
Custom Framing
I have started doing frames for people, custom sizes, timbers, glass etc. All the frames except the hexagonal one are mortise and tenon. The hexagonal one is glued with a biscuit for strength.
The timbers are silky oak, pine, stained pine, camphor laurel/young sapwood, and jacaranda.
The picture that is on the easel is mine, it's a print from Jenny Mace from Barcaldine which I bought and framed with a view of selling it. The frame is a frame within a frame, just an experiment to gain some depth and size without buying bigger material. This framed print was exibited at an exhibition of her work here at the hall of fame as an example of a local framer.
100_1685.jpg100_1684.jpg100_1524.jpg100_2038_cropped.jpgIMG_1459.JPGIMG_1462.JPGIMG_1463.JPGIMG_1465.JPGIMG_1467.JPG
All comments and criticisms welcome.
RobCheck my facebook:rhbtimber
-
6th January 2015 07:56 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th January 2015, 09:25 PM #2
Hi,
Very nice. What finish have you used on them?
RegardsHugh
Enough is enough, more than enough is too much.
-
6th January 2015, 09:52 PM #3
I thought I had all the information. Finish is one coat of clear shellac, scrubbed vigorously with 0000 steel wool with traditional wax until it starts to disappear and then polished before it goes hard. Leaves the finish silky smooth without the plastic look that paint gives. It's that silky feel that all my customers want.
RobCheck my facebook:rhbtimber
-
10th January 2015, 04:46 PM #4Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Very spiphphy Rob!! With that standard of work you will never be short of customers.
Similar Threads
-
Custom Trunks
By Roland01 in forum WOODWORK - GENERALReplies: 6Last Post: 1st September 2010, 01:27 PM -
Custom BarrelBack
By Jasbel in forum BOAT DESIGNS / PLANSReplies: 0Last Post: 12th September 2009, 10:53 AM -
Custom '57 Twin
By ciscokid in forum MUSICAL INSTRUMENTSReplies: 24Last Post: 25th June 2009, 10:12 AM -
Custom Carving anyone?
By Mr THX in forum WOODCARVING AND SCULPTUREReplies: 0Last Post: 13th June 2008, 01:43 PM -
Custom Bar
By Pop in training in forum WOODWORK - GENERALReplies: 4Last Post: 1st February 2008, 11:40 PM