Needs Pictures: 0
Results 1 to 10 of 10
Thread: Desk with a glossy finish...
-
22nd August 2018, 10:08 PM #1
Desk with a glossy finish...
I know glossy finishes aren't exactly the height of fashion but I mistakenly bought a can of Minwax wipe on poly cheaply when Masters went out of business and couldn't be bothered taking it back. So I used it on this desk I've just completed.
I think it looks OK, whaddya reckon?
Desk2.jpg
-
22nd August 2018 10:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
23rd August 2018, 07:39 AM #2
...
Last edited by Tccp123; 23rd August 2018 at 08:36 AM. Reason: Trying to work out how to add a pic directly in post
-
23rd August 2018, 05:36 PM #3GOLD MEMBER
- Join Date
- Oct 2014
- Location
- Caroline Springs, VIC
- Posts
- 1,645
I reckon it looks pretty damn good. I like glossy finishes but I prefer easy, so I mostly finish to a satin sheen or worse
-
23rd August 2018, 05:42 PM #4
Thanks Kuffy. Coming from the master I take that as a compliment. I like satin as well for both aesthetic and practical reasons but when I saw that MinWax WOP on the shelf for $7 I couldn't resist . It was only when I got it home I read the label in more detail. But good to see it hasn't been wasted...
-
23rd August 2018, 05:50 PM #5GOLD MEMBER
- Join Date
- Oct 2014
- Location
- Caroline Springs, VIC
- Posts
- 1,645
You always have the option of dulling back a gloss finish anyways. Once it gets marked up a bit through use, a bit of wax and steel wool will bring out the satin lurking below.
-
23rd August 2018, 06:07 PM #6GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 84
- Posts
- 2,718
0000 steel wool and Ubeaut EEE will take any dust nibs off to leave a smooth finish.
I have used Minwax WOP satin on Tas Myrtle and it comes up well after doing the above.Tom
"It's good enough" is low aim
-
31st August 2018, 09:57 AM #7New Member
- Join Date
- Aug 2010
- Location
- Woodbridge, VA
- Age
- 76
- Posts
- 2
[QUOTE=Tccp123;2103362]I know glossy finishes aren't exactly the height of fashion but I mistakenly bought a can of Minwax wipe on poly cheaply when Masters went out of business and couldn't be bothered taking it back. So I used it on this desk I've just completed.
I think it looks OK, whaddya reckon?
It looks GREAT! Nice work!
-
31st August 2018, 10:15 AM #8.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
Looks great to me.
If you are going to do a lot of work on the desk then you may want to consider a clear protective cover like polycarbonate. Rolls of 0.8mm polycarbonate are available from Bunnings. Unfortunately the sizes are 1 x 1m for $37 or 5 x 1m for $134.
If you have the readies then get the bigger roll as any spare PC will be useful for lots of other projects. I bought a sheet of 1mm thick 1.2 x 2.4 m a few years ago and that cost me $95 and I have used every last bit of it.
-
31st August 2018, 10:27 AM #9
Thanks for that advice, it's very welcome because this is the second desk I've made using that timber and I have a problem with the first one where oils from my skin have obviously penetrated the WOP finish, and now there are dark stains where my hands/arms rest. It's only noticeable from a distance...but it's noticeable!
I'm just about to go out so I'll stop at Bunnings and have a look.
-
31st August 2018, 10:50 AM #10.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
Good point.
BTW 0.8 mm can be cut with a strong pair of scissors, or "easy as" using tin snips. The edge can be sanded or flame treated to get it burr free.
PC is cold bendable ie can be bent at room temperature, so the front edge could be rolled over to protect the edge. However, its as springy as all get out and cold rolling would be difficult on such a long piece. The way I would do it is to make a rolled edge on a length of timber as long as the desk and clamp the PC between that piece of wood and another. Then heat along the edge with a hot air gun while bending it - it will need to be bent more than 90º to stay at 90º. Because of the length I suggest finding a helper and use 2 heat guns. Watch out you don't get it too hot or it will form bubbles and turn yellow/brown. I suggest a practice run with a short length.
Similar Threads
-
Finish too glossy jarrah table
By matthouse in forum FINISHINGReplies: 7Last Post: 3rd April 2013, 10:09 AM -
Glossy finish required
By Ozziespur in forum FINISHINGReplies: 5Last Post: 31st May 2012, 12:13 AM -
How to spray a glossy finish
By Dengue in forum FINISHINGReplies: 4Last Post: 29th January 2011, 02:44 PM -
Painting MDF to a glossy finish
By Dengue in forum FINISHINGReplies: 3Last Post: 3rd August 2009, 09:26 PM -
Putting a glossy finish on corian?
By Skew ChiDAMN!! in forum WOODTURNING - GENERALReplies: 21Last Post: 28th May 2007, 03:16 PM