Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: my DVD rack
-
21st May 2005, 04:24 AM #1New Member
- Join Date
- May 2005
- Location
- Florida
- Posts
- 2
my DVD rack
I was hoping to get some criticism on these. I've made a couple for my family's personal use. I've used a blind dado for all the shelves and used an oversized top/bottom for stability. The sides, shelves, top and bottom are ambrosia maple while the back is 1/4" maple ply.
-
21st May 2005 04:24 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st May 2005, 11:57 AM #2SENIOR MEMBER
- Join Date
- Sep 2003
- Location
- Mid North Coast
- Age
- 71
- Posts
- 525
If that's a small DVD rack as the filename implies, I'd hate to see a big one.
It has a very rustic style and looks well built.
Since you are after criticism I would say that the timber is a bit LOUD for such a large piece. Other than that, well done.
-
21st May 2005, 12:01 PM #3
It works for me.
Photo Gallery
-
21st May 2005, 07:25 PM #4
Yup me too, good job.
....................................................................
-
21st May 2005, 09:15 PM #5
Nice job Ranger looks really good. You must have a large collection of DVD's What sort of finish did you use.
Regards
Al .
You don't know, what you don't know, until you know it.
-
22nd May 2005, 12:31 PM #6Senior Member
- Join Date
- Nov 2004
- Location
- Holland Park, Brisbane QLD
- Age
- 48
- Posts
- 361
Nice timber - looks great. I like the design - did one similar last weekend with Australian teak.
Cheers
Danielle
-
22nd May 2005, 03:25 PM #7Senior Member
- Join Date
- Nov 2004
- Location
- Holland Park, Brisbane QLD
- Age
- 48
- Posts
- 361
In fact, here it is. I think the timber is Australian teak, but could be horribly wrong. We got it in a mixed pack from the Mullumbimby Woodworks auction a few weeks back.
Most of our furniture is rustic and uses natural edges (slab furniture). This one actually incorporates a few slabs with splits in them as features (yes the fine woodworkers amongst us would be tsk tsking).
Cheers
Dan and Tom
-
23rd May 2005, 09:45 AM #8
Hi Ranger67,
Nice work - *Very* nice work. Love the timber - would also display nicely as a coffee table.
Cheers
RufflyRustic
-
23rd May 2005, 03:26 PM #9Son Of Odin
- Join Date
- Feb 2005
- Location
- Jarrah Country, South Of Perth, WA
- Age
- 47
- Posts
- 300
looking timber. Must make DVD cases pretty big over in Florida but, eh?
Last edited by Woodlice; 23rd May 2005 at 03:28 PM. Reason: One day I'll figure out what icons are what...
J!
My opinion is neither copyrighted nor trademarked, and its price is competitive. If you like, I'll trade for one of yours.
-
23rd May 2005, 10:53 PM #10New Member
- Join Date
- May 2005
- Location
- Florida
- Posts
- 2
Woodlice, Actually the photo makes the rack look bigger than it is. The rack stands a little under 6' tall. The shelves are designed such that you have an average dvd height plus 1" for fingers. I previously built a smaller rack and realized that if the dvd's were tight and there was no finger room on top, removal was a real pain in the kiester.
Adrian, the word small in the name was in regards to the file size. My digital camera takes 5 megapixel shots and I had to reduce the pixel count and up the compression for the jpg so that I could get the file under the 100k limit for the site. Thanks though, the comment brought a smile to my face on a monday morning, and that's usually pretty tough to do. [img]images/icons/icon12.gif[/img]
Al B, the finish is nothing but straight Tung Oil.
Everyone, thanks for your kind words. I was actually hoping for some more ideas on either the top or the shelves.
I used the blind dados because I wanted the strength of the dado, but I hate using plywood with case and frame construction. I know, plywood for case construction is actually stronger, but I've always liked the look and feel of "real" wood. I guess I've always felt that to cut the living tree into billions of little pieces just to glue it back together was somehow removing something from the wood.
Anyway, enough philosophy. Has anyone tried using a long dovetail joint on the shelf ends so that you could see the triangle on each side of the shelf, and what was your impression of the look? If you have any other ideas, I'd love to here them as well. Just looking for some alternatives in construction technique.
Also, for the top and bottom, I used a butt joint with two dowels in each case side. I was also hoping to get your input on this. I used the oversized boards on the top and bottom as the depth of this rack is only 7" and with the height the racks just weren't all that stable (front to back). The oversized shelves increase the depth to 12". Any other suggestions for a different footing system to help stabilize something like this woudl be great?
P.S. Sorry about the long post.[img]images/icons/icon10.gif[/img]
-
24th May 2005, 10:08 AM #11SENIOR MEMBER
- Join Date
- Sep 2003
- Location
- Mid North Coast
- Age
- 71
- Posts
- 525
Originally Posted by ranger67
I like the comment about 'ply.' It shows that , in there, beats the heart of a true woodie.
PS. Sorry about the 'woodie' titile. I know it's an affectionate term for an erection in your neck of the woods.
PSS. I still hate the wood, but what the hell, it's still a good job.