Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
Thread: ironwood verandah table
-
25th July 2006, 01:37 PM #1
ironwood verandah table
Hi All, i'm having a day off not doing much, so i thought i would take some pics of the table i made for our verandah earlier this year.the first couple of pics show the table in its natural setting.
Attachment 27215Attachment 27216
the next couple show the top which was made by joining 3 pieces together with a reverse glue joint, the 2 outside edges are left with natural edge.
Attachment 27218Attachment 27219Attachment 27220
i wanted to build a trestle style table, after much measuring pieces of wood i had, and much sketching, and head scratching, this is the design i came up with. the bottom of the legs have 20mm thick black polyurethane/plastic type stuff. to make a bit more durable, as our verandah juts out into the rainforest along our creek, and its very humid most of the time. the verandah gets hosed off regularly as well as wallabies and other wildlife make a bit of a mess at times. the black feet stop moisture wicking up into the timber.
the table was finished with 3 coats of adeze, sprayed on.
-
25th July 2006 01:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th July 2006, 01:56 PM #2
the pieces that i used for the top had a couple of splits in them, which were orientated on opposite ends of the top, i cut dovetails out of some beefwood (i thought this would contrast a bit more with the ironwood than what i has ). the cracks were filled with International ht9000 Attachment 27221Attachment 27223
the orange pic was taken with flash.
i was a bit worried about the strength of the legs mitered together, they have proven ok so far. they have about 9 dowels holding each one to the upright, and also i routed a slot on the back to take a 1/2" stainless bolt. this was also filled with ht9000.
Attachment 27224Attachment 27225
stainless bolts were also used to attach the top to the leg uprights, the top needs to be able to come off to move the table, because of the weight factor
-
25th July 2006, 02:00 PM #3
Very nice table Ironwood. Nicely done dovetails for the cracks!
-
25th July 2006, 02:13 PM #4
my wife wanted wedges like these, used to hold the brace between the two legs (cant think of proper name at the moment). the mortices were made by drilling a few holes then chopping out with some large old socketed mortice chisels i picked up at the rockhampton swap meet last year.
Attachment 27228Attachment 27229Attachment 27230
overall i am happy with the outcome, though i dont think i would build another table with the mitered legs like this one, i think i would go with the more traditional style trestle leg.time will tell if this leg design holds up to the rigours of life. the glue used for construction was International epiglue
-
25th July 2006, 02:15 PM #5
thanks Steve, missed your reply while i was typing the last installment
-
25th July 2006, 02:22 PM #6
Ahh - so that's what Ironwood looks like. Nice. You've made an excallent piece there mate.
The only way to get rid of a [Domino] temptation is to yield to it. Oscar Wilde
.....so go4it people!
-
26th July 2006, 12:29 AM #7
Interesting use of a mitre to join the legs. Non-traditional, but why not, if they hold up, which they certainly should with all those dowels and bolts for support. Those wedged tenons, BTW, are called 'tusk tenons'.
Those are my principles, and if you don't like them . . . well, I have others.
-
26th July 2006, 12:49 PM #8Originally Posted by TassieKiwi
-
26th July 2006, 01:00 PM #9Originally Posted by zenwood
I will have to put tusk tenons into the memory bank, and hope it stays there, Thanks
-
31st August 2010, 10:45 AM #10
I was just reading this old thread and thought I would comment on the leg design.
The legs are holding up to normal use without any problems.
The kangaroo's get up on it every night and put a few light scratches in the top, but they would polish out easily.
I still would't use the same design for the legs again, as I stated earlier. But I am not unhappy with them.
-
31st August 2010, 02:52 PM #11Senior Member
- Join Date
- Jun 2009
- Location
- Eaton Western Australia
- Age
- 72
- Posts
- 133
Beautiful
My wife said it was to nice to be outside, I agree. Lovely work.
-
31st August 2010, 05:28 PM #12
Thanks Pete, I made this one to go out on the verandah, and finished it to withstand the rigours of living out there. It matches the benches I built out there as well, see them here - https://www.woodworkforums.com/f40/ne...benches-37935/
The Adeze has held up very well, except for the odd light scratch, it looks as good as the day I finished it.
-
1st September 2010, 08:03 AM #13
Nice work on the table Ironwood .. and kangaroo tested for strength .. would be happy to have that on my verandah
Brett
Only Robinson Crusoe could get everything done by Friday!
-
1st September 2010, 08:51 AM #14
Good to hear it can survive the wild life
What is this Adeze you speak of? Haven't heard of that one.Cheers
DJ
ADMIN
-
1st September 2010, 02:18 PM #15
The wildlife gives everything a workout around here, the Kangaroo's even used to get up on my roof at night, they make a bit of noise on a tin roof .
I had to cut the trees down that were too close to the house to stop the buggers.
Adeze used to be made by "Toby", then it seemed that "Orica" took it over.
I havent used it for quite a while, so I dont know what's going on with it now , Google doesnt seem to be too helpful finding it.
DGI use (or used) it on their benchtops.
This is the same stuff here-
Dale Glass Industries - Polyurethane
Here is a MSDS sheet from Orica for the product
MSDS PAGE: CAS 123-86-4 54839-24-6 4083-64-1 584-84-9 MSDS msds_orica_com---shess-en-cds-010-000000020185.asp
It is a damn good 2-pack finish, I hope it is still available.
Similar Threads
-
Triton v Table Saw - A Newbie's Experience
By Manix77 in forum TRITON / GMCReplies: 50Last Post: 18th February 2007, 01:22 AM -
Router Table and Downdraft Table
By silentC in forum WOODWORK PICSReplies: 27Last Post: 23rd November 2006, 05:22 PM -
Sliding extension table - out-of-square cuts
By Swagman in forum TRITON / GMCReplies: 3Last Post: 31st July 2005, 08:34 PM -
Ironwood Hall table
By Dion N in forum WOODWORK PICSReplies: 7Last Post: 19th June 2004, 11:27 PM -
Bandsaw Table
By DPB in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 5Last Post: 25th March 2004, 01:21 PM