Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
19th February 2012, 06:56 PM #1
jarrah football and jarrah woolbale
Haven't been on for a long time but still pottering around the woodwork shop. Here are a couple of different things I made.
A Jarrah woolbale for a presentation and a Jarrah football, again for a presentation.
The lathe didn't like the 5" square block so I had to hold it in one hand and use the electric plane to roughly shape it up. That's ok, still got all the fingers.
The football is 4 pieces of jarrah seperated by mdf sheeting.
The woolbale is 6 pieces of jarrah all mitred at 45 deg. The top flap is jarrah veneer glued at back edge and sanded off. Staples were as close as I could get to bale hooks.
-
19th February 2012 06:56 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th February 2012, 04:44 PM #2
Nice work on the football and bale.
Next I might suggest that you place the timber in some sort of wedge and secure this to the wedge then use an electric plane.
Similar Threads
-
Jarrah Burl platters and a Jarrah Bowl
By Willy Nelson in forum WOODTURNING - GENERALReplies: 10Last Post: 17th September 2009, 06:55 PM -
She Oak, Jarrah, Wandoo, Marri, Old Growth Jarrah
By Taries in forum TIMBERReplies: 1Last Post: 22nd June 2006, 11:34 PM -
Jarrah Coffee Table, Jarrah Burl Bowl and other wood pics
By leighd in forum WOODWORK PICSReplies: 10Last Post: 17th June 2004, 10:08 AM -
Picking Jarrah from a Jarrah and Karri rack
By gmcginty in forum TIMBERReplies: 5Last Post: 7th December 2003, 11:52 PM