Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2003
    Location
    ...
    Posts
    7,955

    Default Maintaining my garden seats.

    Over the years I have collected an eclectic collection of wooden garden seats and benches, and having built some as well , as I believe a garden needs plenty of seating to add interest and comfort whilst being in the garden.

    As I live on one of those quickly becoming rare 1/4 acre blocks I have room for plenty of seats but every so often they need maintenance and/or repairs and painting. This year is shaping up to be the year of doing this as I'm not yet up to do much in the garden and it's too cold to do much else.

    In view of the interest in making my recovery chairs I'll post some photos and details as I repair each one.

    The first job involved the only garden bench I've ever bought back around 1982, being a two seater with metal sides and wooden slats. All the slats were in bad condition so earlier this year, as a final job before my operation.

    I replaced all the slats and repainted the seat. The timber for the replacement slats came ready made from a futon bed frame thrown out in a garbage collection. Currently standing just outside the workshop.


    Peter.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2003
    Location
    ...
    Posts
    7,955

    Default Rustic Chairs.

    A few years ago I collected, again from a hard rubbish collection - my favourite source of good stuff , two rustic timber type of garden seats. They are big and beefy and together with some discarded lounge chair cushions are very comfortable.

    At the time all I needed to do was add some bolts to replace the nails that held it together, but I was never happy with the small arm rests. Recently in my travels I picked up some timber that allowed me to make better arm rests for these chairs, similar in shape and size as on my recovery chairs.

    Photo 1 shows the original chairs with the original arm rests and photo 2 without.

    Photo 3 show the timber I collected for the new arm rests and photo 4 show the new arm rests ready for fixing to the chairs.

    Photo 5 shows the chairs finished in the back yard. They are next to my recovery chairs as per photos 6 and 7.

    Next the chaise lounge.


    Peter.

  4. #3
    Join Date
    Jun 2003
    Location
    ...
    Posts
    7,955

    Default Chaise lounge

    A few years ago I picked up a very basic chaise lounge that had one slat missing and some other minor damage. 20 minutes in the workshop to cut a new slat, reglue and rescrew the damaged bit back on and with a new coat of paint was quite okay.

    However 2 weeks ago, whilst in Bunnings, I was browsing through the Triton woodworking plans and I saw that the chaise lounge in those plans had an armrest with a lift up side table.

    So I decided to make side arms on mine to make it more comfortable.

    Photos 1 and 2 show the side arms and photos 3 and 4 shows it painted with photos 5 and 6 showing the chaise lounge in position in the covered bbq area after a new coat of paint. Note the side against the wall is longer to have extra room for a few drinks.

    Next on the agenda is fix up my collection of Jack & Jill (or as I prefer Peter & Elaine ) seats.


    Peter.

  5. #4
    Join Date
    Jun 2003
    Location
    ...
    Posts
    7,955

    Default Jack & Jill seats.

    Over the years I collected an assortment of preloved garden seats known as the Jack & Jill type. Most required some minor work at the time and have been in use for a while and now require some maintenace and a repaint.

    The first one had a few parts in the seat and back rests that had started to rot and photo 1 shows it being repaired in the workshop. Photo 2 shows it after painting back in its spot in the back garden.

    The second one just needed a repaint and photo 3 shows it along the fence next to the bbq in the bbq area. This area has not only this seat but also the chaise lounge and the bbq, fridge and sink unit, serving and storage unit and 2 tables and seating all under cover between the house and the side fence.

    The third seat also only required repainting and photo 4 shows it in position on the porch next to the front door giving a view of the garden. It is one of my favourite positions to sit on a sunny afternoon drinking a cup of coffee and see the neighbourhood go past.

    Currently I'm working on the fourth and final seat which required a major makeover.


    Peter.

Similar Threads

  1. Honda Odyssey 2.3L 7 seats upholstery
    By zillah in forum UPHOLSTERY
    Replies: 3
    Last Post: 23rd March 2008, 12:52 PM
  2. Where can I get splint for weaving seats ?
    By JDarvall in forum WOODWORK - GENERAL
    Replies: 18
    Last Post: 14th September 2007, 12:22 AM
  3. Bench seats
    By Tex B in forum WOODWORK - GENERAL
    Replies: 5
    Last Post: 17th September 2006, 09:52 AM
  4. Splints for chair seats
    By Tony Robinson in forum WOODWORK - GENERAL
    Replies: 4
    Last Post: 30th December 2005, 11:35 PM
  5. Maintaining the finish
    By Gavin04 in forum FINISHING
    Replies: 3
    Last Post: 7th September 2005, 03:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •