Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
-
3rd September 2006, 11:27 AM #1
First major project with Studley's wood.
I believe its spotted gum. The 'stiles'?? cut from some 4x2 and the shelves 135x19 flooring, generously donated by TexB.
Sanded to 400, shellaced and UB waxed.
Not quite finished, I wanted to see how it looked in situ before finishing the top, veneering the shelf end and deciding how the bottom skirt should look.
Bit tedious project, lots of belt sanding and finishing. The timber was all warped to some degree, so a bit of cutting and jointing required. Lots of tear out, even with newly sharpened blades. Hard and dense as hell.
Worst part was getting it in the house. It is 2075 tall and the door is 2000. I assembled on the verandah, minus the top shelf, then tilting with great difficulty manouvered thru the (wide) sliding door. Must weigh close to 150Kg.
Its 2000 wide. No backing, except for the middle bit, as I feel that would make it all too dark. Lots of mistakes, hopefuly hidden by skillfull camera work. In real life it looks a little better than pics, as the flash makes it all a bit starkBodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
3rd September 2006 11:27 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd September 2006, 05:42 PM #2
Thats a serious undertaking, you've done well Bodgy it looks great.
It's better to be thought of as a fool than to speak up and remove all doubt!
-
3rd September 2006, 07:11 PM #3
Looks good Bodgy, just what your woodwork book collection needs!
....................................................................
-
3rd September 2006, 07:44 PM #4
Great work, like it a lot. I've had requests to build a large-ish bookcase and was thinking of a wall unit type arrangement. Backing the central section only also good design idea. Well done.
-
3rd September 2006, 07:47 PM #5
Great work Bodgy. You've done a great job on the finish, too. Really came up a treat.
Tex
-
3rd September 2006, 08:49 PM #6GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
You've got to look out for wide angle lenses (or wide angle settings on variable lenses) when you photograph something with a regular grid to it - they tend to make strange bulges & curves appear where none exist.
-
3rd September 2006, 09:21 PM #7
-
3rd September 2006, 09:35 PM #8Originally Posted by bsrlee
Invest hours in experiment or,
Read the instructions, which would put me into code violation.
Neither of which fills me with enthusiasm. I had noticed that the uprights look a little bowed. They're actually not, thanks to the table saw.
Thanks to all for the kind comments.Bodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
3rd September 2006, 10:04 PM #9
Nice work there Bodgy you have done an excellent job. Bet SWMBO was happy with the finished result. Well done.
Regards
Al .
You don't know, what you don't know, until you know it.
-
3rd September 2006, 10:11 PM #10Originally Posted by Al BBodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
3rd September 2006, 10:36 PM #11
Very nice
Could do with something like that here.Brett
Only Robinson Crusoe could get everything done by Friday!
Similar Threads
-
Symtec Wood lathes The Guaranteed Honest Facts
By SYMTEC The Manufacturer in forum WOODTURNING - GENERALReplies: 3Last Post: 11th February 2007, 10:12 AM -
Wood ID wanted
By RETIRED in forum TIMBERReplies: 8Last Post: 2nd June 2006, 10:00 PM -
Snake Skin Wood???
By Treeboy in forum TIMBERReplies: 21Last Post: 13th April 2006, 11:51 AM -
exotic wood finish
By dale grible in forum FINISHINGReplies: 2Last Post: 19th October 2004, 10:51 AM -
tas myrtle wood question
By river rat in forum WOODTURNING - GENERALReplies: 1Last Post: 1st July 2003, 06:03 PM