Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: overhaul of something old
-
21st December 2006, 02:13 PM #1
overhaul of something old
got it to go after working out how it worked and new seals fit was my pops
using it burn carving now working (when cools down a bit)
arty
-
21st December 2006 02:13 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
21st December 2006, 06:41 PM #2GOLD MEMBER
- Join Date
- May 2003
- Location
- Perth WA
- Posts
- 3,784
The old kero burner is a classic and I can remember fitting leather washers to keep one going for Dad.
Many backyard plumbing jobs were done with these beauties.
Nice example of a bit of our past.Cheers,
Rod
-
22nd December 2006, 08:42 AM #3
I remember them to and I still have my 'miniature' knockdown brass kero pressure stove from the early 60's (when I was a scout).
Leather washers were used and was the norm, usually soaked in a bit of oil first.
That pump washer was probably made of leather too, usually about 3-4 thin layers then oiled.
Do you know how to fire it up??Stupidity kills. Absolute stupidity kills absolutely.
-
23rd December 2006, 12:31 AM #4
yep took a bit to work out,, l light a rag with kero on it to heat the tubes up this seem to adermise the kero if there is a better can you please tell me , it feels a bit risky but able to get good flame going
arty
-
23rd December 2006, 12:36 AM #5
old models are collectors items and can get reasonably big bucks (that's if you're a money grubbing philistine..)
If you never made a mistake, you never made anything!
-
23rd December 2006, 12:38 AM #6
must have a look at the old mans shed again
-
23rd December 2006, 08:30 AM #7
That little cup at the back of the tubes should probably be a container for metho.
Just sit it back and fill the cup with meths and light, as it starts to die down start to pump gently until the kero takes hold.
have all the filler caps etc closed up tight before you start.
The primus stoves work on the same principle with a small reservoir at the base of the burner.Stupidity kills. Absolute stupidity kills absolutely.
-
23rd December 2006, 10:02 AM #8
thanks for that advice sounds alot better way than a burning rag
have had it working burning some art work.it's not like useing gas but having fun anyway who dosn't like playing with fire
artysmile and the world will smile with you
-
23rd December 2006, 10:11 AM #9
-
23rd December 2006, 10:17 AM #10
it makes you wont to give that plunger a few more pumps
im going to polish it up and have it as a working art . dad will love itsmile and the world will smile with you
-
24th December 2006, 04:54 AM #11Member
- Join Date
- Nov 2005
- Location
- Kihikihi, TeAwamutu
- Age
- 80
- Posts
- 98
Spirit
When you are warming it up with the meths in the warming cup make sure that the filler cap is tight but leave the pressure relief valve, just below the filler cap, loose so that any pressure build up from the heating process doesn't cause the kero to come out of the nozzle flaming and set fire to anything.
A pommy mate of mine set fire to the curtains of his mothers house because of this. Years ago when we used to use them for burning off paint the poms used to burn off indoors. Us kiwis only ever used them outdoors.