Originally Posted by Rocker
Don,
I think it might be feasible to cut all four legs just above the rocker blocks and then re-attach the rockers after shortening the the back legs by 15 or 20 mm, so as to give a comfortable reclination angle. You would obviously have to re-rout the dowel holes in the legs and rockers, but I think it could be done. I think it would be worth doing, rather than living with a project with which you are not satisfied. I am very sorry that I didn't include sufficient warnings in my instructions to prevent the scaling error that caused your problem and would be very happy to refund your money if you find that you cannot rectify your problem. I don't like to think that the project has not worked out as it should have done.
Rocker