![Thanks](https://www.woodworkforums.com/dbtech/thanks/images/thanks.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: Scoops
-
28th February 2014, 10:56 PM #1
Scoops
I came up these the other day to put in a shop that is selling my stuff. They are a big hit.
Made from some blackwood that came from Mappleman finished with ubeaut food safe oil.Check my facebook:rhbtimber
-
28th February 2014 10:56 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st March 2014, 08:04 AM #2
Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Nice work Rob!!!
Being Blackwood they should last forever.
-
4th March 2014, 03:21 PM #3
I like the idea. I am thinking that you turned these on the lathe and put them together from the parts.
-
7th March 2014, 09:10 PM #4
No, never saw a lathe. They were cut out on the bandsaw, the small one from the inside of the large one. They are all hand sanded, that is until I can afford a bobbin sander
. The handles are cut by bandsaw as well. After the inside is sanded, they are glued together with superglue and the outside is then sanded. It's a lot of work, but worth it, it seems.
Check my facebook:rhbtimber
-
8th March 2014, 01:50 PM #5
Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
That's damned good bandsawing Rob>. Congrats!!!
-
9th March 2014, 07:57 PM #6
I had a order for another set of scoops, so I did them this arvo.
100_1698.jpgIMG_1051.jpgIMG_1052.jpgIMG_1053.jpg
The only drama was I cut the end back to front on the middle one.Check my facebook:rhbtimber
Similar Threads
-
Coffee scoops chuck
By Frank&Earnest in forum WOODTURNING - GENERALReplies: 18Last Post: 10th August 2010, 11:05 PM -
Anyone turn coffee scoops?
By OGYT in forum WOODTURNING - GENERALReplies: 34Last Post: 27th May 2008, 09:11 AM -
Anyone turn coffee scoops? Tutorial.
By OGYT in forum BEST OF THE BESTReplies: 4Last Post: 25th May 2008, 03:18 PM