Found a post on-line about making the above, so decided to have a go.
Had some strips of pallet-timber left over so cut to length and what I thought was a 10 degree angle, glued together in a semi-circle and cut at 45 degrees on the bandsaw.
298416982_5687114287978832_8831000696480706430_n.jpg
Pays to not let your attention to wander.
298992580_5689763097713951_7126956889418627426_n.jpg

Then glued the segments together
299169935_5689908467699414_4742303460184746949_n.jpg 298918541_5689908464366081_4393074811093991862_n.jpg
Tried turning it, but the endgrain didn't like it.
299415815_5692949670728627_2569834295506370419_n.jpg
Repaired the break.
299417992_5701376166552644_2325188257564643492_n.jpg

Ended up sanding the bowl to shape
299987402_5701919523164975_3638090501431522543_n.jpg

Waxed finish.
299976640_5704917022865225_7032465892646335400_n.jpg 300004660_5704917019531892_7624670148720093502_n.jpg