Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    45
    Posts
    3,316

    Default Sir Stinkalot completes the trifecta - Lee Valley, Rockler & Woodcraft

    In the tradition of https://www.woodworkforums.com/f42/si...boston-111605/ and https://www.woodworkforums.com/f42/st...oodies-117077/ comes the latest instalment ……. Sir Stinkalot completes the trifecta …….. Lee Valley, Rockler & Woodcraft.

    The latest trip has been quite productive and given the “Rouge Gallery” hasn’t seen any action in over 12 months when Stinkette was at Lee Valley I thought I would share again.

    Sorry for the up close and personal photographs ..... I had to take them from arms length and with a head the size of mine I need longer arms. The Stinkette has learnt that I am best to go on these shopping trips by myself and as such there was not an official photographer.

    1. Lee Valley – Downtown Toronto Canada.


    Easy access from the CBD with a quick tram ride. Located in an area similar to Fitzroy which was good as it was one of the very few places on the trip that I got a half decent coffee.

    The store was convenient however it was a little strange. They seemed to have many of their products on display however many were behind glass or without original packaging taking away that enjoyment of just browsing and being able to pick up and experience a product. I am sure if I specifically needed to look at something there wouldn't be an issue if I asked, but I didn't want to waste the staffs time on something I wasn't intending to buy.

    Most of the stock was held out the back. The idea was you walk around and compile a shopping list based on the catalogue codes, then you present your list at the desk and the sales assistant goes out the back and collects it all. It was very efficient but in the end I just ended up going over to the computer and browsing the catalogue there to complete my order. Still I managed to spend over an hour looking around and it would be a very good system to have close by as you could email an order and just pop by at lunchtime and pick up the goods. They did have everything I wanted in stock so you cant fault that!

    2. Rockler – Seattle


    Similar to Rockler in Boston it was like a cave filled with the smaller woodworking bits and bobs (handy when you have to carry your goods). Not much larger machinery but a good small range of timber out the back. I do like a Rockler store and still think they should open up one here.

    Easy to get there on a bus from central Seattle. The bus drops you off on the street about half a block up from the store.

    3. Woodcraft – Seattle


    Much bigger than Rockler. More like a Carbatec with a larger range of machines. They had a good looking demo area and workshop. Again well stocked with a good range.

    Again easy to get there from central Seattle on a bus. You do need to walk a block or two from the bus stop which wasn't particularly difficult but it was a little harder to work out where to get off and which direction to walk in. I should have put a larger Google map on my phone before leaving.

    So enough chat ..... now the goodies …….








    So in summary:

    I didn't really come across any new products or anything that I would have trouble getting in (or to) Australia. I guess the internet now makes purchases so much easier. The prices were not that much lower than we have in Australia on most goods.

    I was hoping to get an Incra hinge maker as they are much cheaper in the USA but they are a direct order into Rockler and Woodcraft from Incra (I should have worked that out and pre-ordered with an in store pickup but I wasn't organised enough). I was intending on getting an Incra tablesaw fence but it would have been too difficult to get home

    As an example on prices the GRR Ripper is only $10 more expensive here (in the single outlet that I can find) than in the USA where it is made. the narrow ripping attachment is about $5 more or 25%. The converter pro calculator was on sale for $5 so I got another one but their regular price is $20 over there .... the same as here. I didn't pay too much attention to the prices of machinery or power tools but I think they were considerably cheaper.

    Whilst it is good to have a look at these stores when the opportunity presents I think that now with the internet the treasure trove of unobtainable foreign goods is long gone.

    Cheers

    Stinky
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2003
    Location
    ...
    Posts
    7,955

    Default

    Good rogue gallery.

    Photo 1 serious, photo 2 a certain smile but photo 3 a happy chappie. Well done.


    Peter.

  4. #3
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    I was thinking that I might say something like all in one day. Now that's commitment. But alas you stopped to change shirts.

  5. #4
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    45
    Posts
    3,316

    Default

    Don't tell anybody but ..... Rockler and Woodcraft were split over two days as well. Given a lack of washing facilities towards the end of travel I was forced to wear the same shirt twice
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  6. #5
    Join Date
    Mar 2005
    Location
    In the shed, Melbourne
    Age
    52
    Posts
    6,883

    Default

    I've got one of those calculators, and they're fantastic.

    In the last two days I've put in orders at Rockler and Woodcraft, and you're just over there. Buy a suitcase and if you're paying I can fill it.

    Lucky bloke.

    Should've given Skew a shout, he's in Toronto.
    I make things, I just take a long time.

    www.brandhouse.net.au

Similar Threads

  1. Barwon Valley Woodwrights Woodcraft Exhibition.
    By issatree in forum ANNOUNCEMENTS
    Replies: 11
    Last Post: 31st October 2010, 06:24 PM
  2. Sir Stinkalot at Rockler Boston!
    By Sir Stinkalot in forum ROGUES GALLERY
    Replies: 5
    Last Post: 24th February 2010, 08:15 PM
  3. HB sir Stinkalot
    By John Saxton in forum Hatches, Matches & Dispatches. Birthday greetings and other Touchie-feelie stuff.
    Replies: 8
    Last Post: 5th May 2007, 08:58 PM
  4. Barwon Valley Woodwrights Woodcraft Exhibition
    By Sir Stinkalot in forum CLUB EVENTS - News & Information
    Replies: 4
    Last Post: 4th November 2006, 04:13 PM
  5. Barwon Valley Woodwrights Inc Woodcraft Exhibition
    By Sir Stinkalot in forum CLUB EVENTS - News & Information
    Replies: 10
    Last Post: 5th November 2005, 07:42 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •