Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 17
Thread: foam cutting
-
11th June 2017, 07:16 PM #1
foam cutting
I have access to used coolroom panels 3.6m x 1.2m x 180mm thick. They are colorbond each side
I can use these but would prefer 90mm thick with colorbond on just one side. For the project I have in mind I will need 10 full panels (20 half panels) what is the best way to but these.
1. cheese wire with wooden handles (yes long enough to cut width ways.
2. hot wire but how do I get wire hot? Ok place both ends in power point....no thanks
3.
4.I would love to grow my own food, but I can not find bacon seeds
-
11th June 2017 07:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th June 2017, 08:37 PM #2
Tony, I got onto some 100mm panels that I wanted to use as a ceiling in my shed. So I needed to cut in half giving me 2/50mm. What I did was to use my welder set as low as it could go (maybe 40 amps) connected the welders negative and positive to some thin steel wire and with the mate on one side and me on the other with the wife ready to switch the welder on and off as we spit the panel. We laid the panel flat and ran some 50mm on either side and just pushed the ire along. We found we needed the wife because we kept melting the steel wire. It was a very easy exercise
Just do it!
Kind regards Rod
-
11th June 2017, 09:07 PM #3Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
Use nichrome wire if you wish to heat it. It's what I used to use in foam cutters when making model glider wing blanks.
Nichrome wire and transformer selection
-
11th June 2017, 09:35 PM #4
We used to use a "Beta Blade" on a circular saw to cut sandwich panel.....
[something similar to the one below]
https://austsaw.com.au/products/panel-cutters
For cutting the polystyrene foam, a hobby Hot Wire used by Model Train modellers.....
-
11th June 2017, 10:53 PM #5
Crowie.... that blade cuts 150mm diameter..... i want to slice panels 1200mm !!!! wide
Lappa your doing my head in mate, I hit a teacher once cause he was forcing me to learn that funny x-y=zk5 g crap Although that wire combined with Chambezio's idea would work
any other ideasI would love to grow my own food, but I can not find bacon seeds
-
12th June 2017, 05:58 AM #6rrich Guest
I'm not sure exactly what your foam is. I had to do something similar for the seats of chairs.
There are a couple of methods.
I tried the hot Nichrome wire using a couple of old electronic power supplies. The wire did not get hot enough as the power supplies could not supply the necessary amperes.
The one that worked the best was an electric carving knife. The type with the double blades that reciprocate in opposite directions during operation. These carving knives have not been popular here for at least 30 years so you may have to do your shopping at estate or yard sales.
-
12th June 2017, 11:43 AM #7GOLD MEMBER
- Join Date
- Feb 2015
- Location
- Strathalbyn South Australia
- Posts
- 1,141
foam cutting
Edited: deleted post as was a silly idea
-
12th June 2017, 11:56 AM #8SENIOR MEMBER
- Join Date
- Feb 2016
- Location
- Perth WA Australia
- Posts
- 829
yep hot wire cutter is the way to go.
If you google it there are heaps of instructions on how to make one, all the supplies you need can be found at your local jaycar store.
It can be as cheap/as expensive as you want. The most expensive part is finding something that is sufficient to heat up your wire. There is calculators that will help you determine how much power you'll need depending on the overall length of wire.
-
12th June 2017, 11:57 AM #9GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Little River
- Age
- 78
- Posts
- 1,205
-
12th June 2017, 01:21 PM #10Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
Heres a diagram of what we used. We actually used a wire wound rheostat in place of the light dimmer but I'm told 400VA light dimmers work fine.
FOAM CUTTER.jpg
-
12th June 2017, 01:34 PM #11GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Deleted. I did not read the original post properly, in a hurry
regards,
Dengy
-
12th June 2017, 02:45 PM #12GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
I use nichrome wire (from jaycar) attached to my old pyrography machine. The machine was my fathers, just looks like a modified battery charger, though I don't really know how modified.
--------------------
Edit, just reread your op and noticed your panels are 180mm thick. My outfit wouldn't cut that, it struggles on 60mm thick.
ArronApologies for unnoticed autocomplete errors.
-
12th June 2017, 05:31 PM #13
Tony
All the coolroom panels I have encountered have had polystyrene insulation if that helps any with how to cut them. As others have said an electric carving knife works very well on this material, but hardly up to your job (size matters ). Could you consider a hedge trimmer (a largish one) and go from both sides as they are not much different than an electric carving knife? You could hire one reasonably cheaply. Bear in mind I have never tried this.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
12th June 2017, 06:55 PM #14
interesting idea...wonder what the hire place would say on a monday morning?
far out hows this for crap luck. Go into hire place this morning and ask about a hedge trimmer and he asks...." you cutting hedge down or coolroom foam panels?" "what"? "Saw your post last nite on ford forum..... " mutter mutter mutter,I would love to grow my own food, but I can not find bacon seeds
-
13th June 2017, 12:36 PM #15SENIOR MEMBER
- Join Date
- Feb 2016
- Location
- Perth WA Australia
- Posts
- 829
just an idea, but if you can find someone with a bandsaw mill, they might be willing to slice it up for you.
Similar Threads
-
Cutting Flexiable Foam
By rod1949 in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 8Last Post: 25th August 2014, 09:28 AM -
Sophisticated cutting device for lost foam castings
By Michael G in forum METALWORK FORUMReplies: 10Last Post: 22nd April 2012, 09:56 PM -
Foam
By Woodmax in forum UPHOLSTERYReplies: 7Last Post: 6th April 2009, 08:33 PM -
Foam???
By felixe in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 6Last Post: 22nd May 2006, 02:56 PM -
How much foam?
By echnidna in forum WOODWORK - GENERALReplies: 3Last Post: 25th April 2006, 11:00 PM