Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    66
    Posts
    1,277

    Default For those who are interested

    OK so I am glad to be back..

    Grunt, I have achieved my restricted "ultralight" licence, and before anyone jumps to the wrong conclusion about what an ultralight is look here:

    Aussie built aircraft

    The aeroplane on the front page (J160) is similar to the model I have been learning in.

    Seats 2 peolpe, has a range of 1030nm, (nautical miles for those un initiated) at an average speed of 100 knots ( about 180 km's per hour)

    To date I have 61 flying hours 40 of those were with the instructor.

    at present I am finishing up my navigational exercises.

    In the week or two I have to do a 4 hour nav flight around the outskirts of melbourne and back across Port Phillip Heads and home, the after that is my nav assessment!

    In August I am off to Bundaberg, mainly to inspect the factory and also to visit the rum place.

    A new J160 is around $75,000 ( doesn't hurt if you say it real quick)

    IF your are still interested Gumby, do a conversion to ultralights, the cost is less than your PPL, and you can go nearly everywhere a GA pilot can go.

    Kev
    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Oct 2003
    Location
    Romsey Victoria
    Age
    63
    Posts
    3,854

    Default

    I've had a close look a Jabiru and think they're damn fine aircraft. In the scheme of aircraft running costs, a Jabiru is hard to beat.

    What are the restrictions of an Ultralight pilot?
    Photo Gallery

  4. #3
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    66
    Posts
    1,277

    Default

    Daylight hours only, as well as the usual weather restrictions..

    Basically if you can hold a drivers licence and are over 15 , you can get a licence for these things.....
    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  5. #4
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    67
    Posts
    4,377

    Default

    Quote Originally Posted by Brudda View Post
    Basically if you can hold a drivers licence and are over 15 , you can get a licence for these things.....
    So how did you get one?

    Richard

  6. #5
    Join Date
    Aug 2003
    Location
    Melbourne - Outer East Foothills
    Posts
    6,786

    Default

    Quote Originally Posted by Brudda View Post

    In the week or two I have to do a 4 hour nav flight around the outskirts of melbourne and back across Port Phillip Heads and home,
    Please avoid the Upper Ferntree Gully area.

    Quote Originally Posted by Brudda View Post

    IF your are still interested Gumby, do a conversion to ultralights, the cost is less than your PPL, and you can go nearly everywhere a GA pilot can go.

    Kev
    I won't fly in anything which doesn't have a toilet and a middle isle where the drink cart goes.

  7. #6
    Join Date
    Oct 2003
    Location
    Romsey Victoria
    Age
    63
    Posts
    3,854

    Default

    My instructor had his commercial pilots licence before he had his car licence. He 20 when he was instructing me.

    Tell me when you pick up your Jabiru and I'll drive down for a look see.
    Photo Gallery

Similar Threads

  1. 1 Day Router Course ----Interested????
    By Gwhat in forum ROUTING FORUM
    Replies: 45
    Last Post: 19th January 2008, 05:50 PM
  2. Interested in sellin plans, ebooks, cd's, how to's etc
    By echnidna in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 0
    Last Post: 11th May 2006, 08:49 PM
  3. Energetic and Interested Woodworker looking for work
    By barrysumpter in forum ANNOUNCEMENTS
    Replies: 5
    Last Post: 15th February 2002, 10:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •