Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Forwarding between VLANS
-
6th November 2006, 01:49 PM #1
New Member
- Join Date
- Nov 2006
- Location
- atlanta
- Posts
- 1
Forwarding between VLANS
I have a layer 3 switch(equivalent to router) I have created four vlans on it. I have assigned IP interfaces to each vlan. I want to communicate from pc1 which is connected to vlan1 to pc2 which is connected to vlan4. The way I want this communication is thru forwarding i.e vlan1 forwards the data to vlan2 ,vlan2 to vlan3 and finally vlan3 sends it to the destination on vlan4.
All vlans and interfaces are up and working and able to communicate directly i.e vlan1 can directly communicate to any of the three vlans. But I want to have this forwarding mechanism as explained earlier.
Can someone explain how this can be done
-
6th November 2006 01:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th November 2006, 01:55 PM #2
Member
- Join Date
- Nov 2004
- Location
- Mt Evelyn, Vic (Australia)
- Posts
- 51
Normally you would have tables that defined which IP addresses would be sent through which 'vlan'.
However, the routers on this forum are woodworking tools - I recommend woodworking as a hobby, to get away from IT stuff!
-
6th November 2006, 02:31 PM #3
SENIOR MEMBER
- Join Date
- Aug 2003
- Location
- Pambula
- Age
- 58
- Posts
- 12,779
Maybe you should build one of Rocker's morticing jigs. No, a jig is NOT a dance.
Reply With Quote
Tags for this Thread
vlan2,
assigned,
communicate,
communication,
connected,
created,
data,
destination,
directly,
earlier,
explain,
explained,
finally,
forwarding,
forwards,
i.e,
interfaces,
layer,
mechanism,
pc1,
pc2,
router,
sends,
switchequivalent,
vlan,
vlan1,
vlan2,
vlan3,
vlan4,
vlans
