Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. #1
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    12,746

    Default Wood heater ... stumped!

    Cast iron internals inc. 2 sacrificial bits. Have replaced them several times but this time the front baffle, rusted and sagging, wasn't gonna come out. It's about 10 cm wide and just has lips at the end. Normally raise one side, push it to the corner and the other side clears and that's that.

    Cleared the 'shelves', pushed back the other sacrificial bit, wiggled til I was woggled. No go.

    K, sooo, get out the hammer.

    Nup. There's a big vertical rib. Too strong.

    So it had to be cut. 10cm angle grinder looked best but how in heavens name?

    Lie on my back doing it overhead with two hands or kneel in front using one hand?

    This was looking ridiculous.

    I tried the one handed method. All the PPE. Daughter nearby with vac. to suck up the dust kicked up and to ring 000 if nec.

    Light touch, no rush. Got some way through before running out of depth on the wheel.

    OK, get out the hammer again. One thump and she broke.

    Halle-bloody-lujah!

    Now have a place again to burn my mistakes
    Cheers, Ern

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Smile

    Oh to have bee n the proverbial fly on the wall!!!

  4. #3
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    12,746

    Default

    heheh.

    GJ's fingerprints are burning as we speak.

    That was a long-time-ago dead-end project. The learning was good and the warmth is a bonus.
    Cheers, Ern

  5. #4
    Join Date
    Jul 2008
    Location
    act
    Posts
    880

    Default

    if only there was a pic of you in a vulnerable position with all the ppe sporting that grinder in one hand!

  6. #5
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    12,746

    Default

    Took a pic of the old baffle. Amazing colours.

    2nd fire is now roaring, started with wine oak barrel kindling. Lovely smell!
    Attached Images Attached Images
    Cheers, Ern

  7. #6
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,662

    Default

    You prolly sounded much like GJ did in Saturday arvo when he couldn't download pics to his puta. Even I hadn't heard some of those words!
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  8. #7
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    12,746

    Default

    Cam and pic d/l has sometimes provoked rude words from me too. With watchemcallit, RCA jacks?, puter has to be rebooted to get devices talking.

    In this case my only rude words were saved for splitting wood with daughter out of hearing.

    Cyclone splitter with collar; never been abused til the handle split.

    And dammit, much as I can see the point of a collar, replacing the handle is going to be a pox.

    So maybe it's a throw-away item.

    Anyway, I got some lovely heat out of worm-ridden acacia and oddly, out of old NIP off-cuts. That stuff has been out in all weather for several years with little rot. Amazing timber.
    Cheers, Ern

  9. #8
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Exclamation

    No doubt about the acacias Ern; They burn with great heat. Apparently the heat from the windrowed Acacias
    that were cleared and burnt on the Darling Downs approached that of the sun!!!

  10. #9
    Join Date
    Apr 2011
    Location
    se Melbourne
    Age
    62
    Posts
    2,567

    Default

    Always found I could get at least one piece of wood from a block splitter - the handle.

    I have burnt a few over the years. Don't you hate it when someone else uses the splitter and it comes back with a damaged handle.. Bad enough when it brakes when you are using it.

  11. #10
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,360

    Default

    Quote Originally Posted by Handyjack View Post
    Always found I could get at least one piece of wood from a block splitter - the handle.

    I have burnt a few over the years. Don't you hate it when someone else uses the splitter and it comes back with a damaged handle.. Bad enough when it brakes when you are using it.
    Ain't that the truth? I have an infallible method for detecting cracks in splitter/axe handles. Unfortunately, it involves intense pain in the web of my thumb.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  12. #11
    Join Date
    Feb 2013
    Location
    Bunya Mountains, Australia
    Age
    69
    Posts
    522

    Default

    I split firewood weekly ... I bought a Fisker Block Splitter.

    Handle guaranteed for life, blade for 25 years. Best axe I have ever used, super-light, short haft so you can easily increase blade impact speed. Splits excellently, non-tiring.

    You can almost carve the billet while splitting .... some new kinda technology in the blade .. almost appears as a plastic/metal fusion.

    The handle is nylon/epoxy.

    Bunnings sell them, about twice the price of a normal block splitter. Finnish made.

    hope this helps ... greg

  13. #12
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    12,746

    Default

    Thanks for the tip Greg.

    That brand rings a faint bell. I'll go down and have a squiz.

    Don't mind paying double if it lasts.
    Cheers, Ern

  14. #13
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    12,746

    Default

    Shmick.

    Bunnies only stocks the X27.

    Have ordered an X25 from Amazon. $72 shipped in 2 weeks.

    So it'll be wedgies wedges til then but oh my:

    Helicoidal Splitting Wedge SAFE-T / Felling and Wood Splitting Tools / Products | Fiskars Australia

    I normally only use a wedge on crotch pieces and sometimes it takes two to free the first
    Cheers, Ern

  15. #14
    Join Date
    Feb 2013
    Location
    Bunya Mountains, Australia
    Age
    69
    Posts
    522

    Default

    Thats not really a wedge ...... I think its a worm-hole from outta space ... haaa

    I have the X25 blocksplitter and the X15Axe ... (both bunnings)

    But don't be put off by these smaller sizes, as I said the increase in acceleration makes up for the lesser mass ...

    The X15 is amazing and its has saved me (when I have been out bush bashing a little over the top)

    cool bananas ... Greg

  16. #15
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    12,746

    Default

    Well you're right Greg.

    The X25 is distinctly smaller and lighter than the old Cyclone job but is working well.

    Might toss it in the camper trailer for the next outback trip.
    Cheers, Ern

Page 1 of 2 12 LastLast

Similar Threads

  1. pot belly wood heater design
    By gallegos in forum METALWORK FORUM
    Replies: 34
    Last Post: 4th July 2011, 09:43 PM
  2. shed Upgrades wood heater & bitumen black
    By Rattrap in forum THE SHED
    Replies: 34
    Last Post: 5th May 2011, 01:09 AM
  3. Wood heater not drawing properly - Help
    By whitewood in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 7
    Last Post: 6th July 2008, 06:47 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •