Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: My home made Table saw Jig.
-
4th February 2015, 08:39 PM #1Senior Member
- Join Date
- Jun 2010
- Location
- Wide Bay Burnett Qld
- Posts
- 293
My home made Table saw Jig.
Here is a Table saw jig I made a few days ago. It is made to hold large and thin strips of timber against the fence. The jig is held down on table saw with a very strong magnet from a hard drive and can be push up against a real thin piece of wood.
Tablesaw Jig for holding timber against the fence 1.jpg (126.2 KB)
Tablesaw Jig for holding timber against the fence 2.jpg (39.7 KB)
Tablesaw Jig for holding timber against the fence 3.jpg (61.3 KB)
Tablesaw Jig Template (Full Size).jpg (34.9 KB)
Cheers Graham.
-
4th February 2015 08:39 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th February 2015, 09:16 PM #2
Very interesting, be interested with your feed back after a month or two of use
The person who never made a mistake never made anything
Cheers
Ray
-
4th February 2015, 10:37 PM #3Senior Member
- Join Date
- Jun 2010
- Location
- Wide Bay Burnett Qld
- Posts
- 293
Hi rwbuild,
It is working so far on boards at 200mm wide and on pieces at 15mm thick that is all I have used on it. But if my table saw sides were wide enough I would like to build something like that to push wide sheet boards against the fence. Also I would need a lot of very strong magnets to do that. I don't have the room to have wide sides on my table saw like a of woodworkers have. I will let you no about the one I built.
Cheers Graham.
Similar Threads
-
Home Made Table Saw ?
By steamingbill in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 9Last Post: 5th February 2013, 02:16 PM -
Home made table Saw
By craigjc in forum WOODWORK - GENERALReplies: 3Last Post: 23rd October 2010, 07:44 AM -
home made table saw
By mjb71 in forum TIMBERReplies: 1Last Post: 7th October 2009, 11:28 PM -
WIP home made table saw.
By weisyboy in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 17Last Post: 26th August 2008, 01:47 PM -
Table saw home made
By Edilson in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 9Last Post: 14th April 2005, 05:46 AM