Thread: Mobile Tool Stand MK 1.

Further to my Post on my Mobile Garden Tool Stand I thought I would also attach photo's of my Mobile Tool Stand MK 1. This version was in fact my first attempt at making a mobile stand out of the base of mobile office chairs.
This model was to provide a mobile base for a stand to support for Air Splitter for my
Saw Dust system to allow me to run one or a pair of various flexible air lines using 100mm or 75mm flexible lines.
The construction consists of the 5 star legs with the stub 50mm vertical post, the rest of the chair seat and back was discarded. I then attached a length of 4 inch PVC pipe to act as the main vertical support with a sleeve so that I could attack a 2 way 4 inch PVC junction piece slightly adapted so that it had an additional male cuppling leg fitted.
The result is as displayed in the photo's.
As a further adaption I have shown a removable table top which is attached by the fitting of a male spigot piece fixed to the underside of the top.
Another recycle job to the list.
All I have to do now is find a use for the rest of the metal work from the chair adjustment gear , this consists of a nice piece of 20mm steel rod about 250 long with a thread cut into it, also the chairs comes with a range of metal handles or turn knobs for tightening the adjustment. I can see these coming in use for turn knobs for a number of uses such as for adjustable stops on fences to saw benches etc.
Waste not want not.
Best wishes for Xmas to everyone.
Mac